Cisco Cisco TelePresence Video Communication Server Expressway
Enabling endpoints registered on the video network to call MOC/Lync clients registered on OCS/Lync
Cisco VCS Deployment Guide: Microsoft OCS 2007 R2, Lync 2010 and Cisco VCS X7.0
Page 45 of 104
OCS: Configure OCS to trust the “OCS/Lync gateway” VCS(s)
OCS must be told which devices to trust for the receipt and sending of signaling messages. If OCS
Director is used, configure the OCS Director pool, otherwise configure all FEP pools.
For TLS (recommended):
Director is used, configure the OCS Director pool, otherwise configure all FEP pools.
For TLS (recommended):
Configure the FQDN of all “OCS/Lync gateway” VCSs and the FQDN of the “OCS/Lync gateway”
cluster as trusted hosts on the OCS.
cluster as trusted hosts on the OCS.
For TCP (not recommended):
Configure the IP of all “OCS/Lync gateway” VCSs as trusted hosts on the OCS.
On OCS:
1. Choose
Start > Administrative Tools > Office Communications Server 2007
.
2. Select the specific OCS pool.
•
If an OCS Director is available, then select the OCS Director pool
•
Otherwise, if a Hardware Load Balancer front ends multiple FEP pools select and configure
each FEP pool in turn
each FEP pool in turn
•
Otherwise, if there is just one FEP pool, right-click on that one
For example if using Standard Edition Servers:
a. Expand Standard Edition Servers.
b. Right-click on the specific OCS FEP pool and choose
Properties > Front End Properties
.
or right click on the OCS Director pool and choose
Properties > Front End Properties
.
If using an Enterprise Edition Server:
a. Expand Enterprise Pools.
b. Right-click on the FEP pool and choose
Properties > Front End Properties
.
3. On the Front End Properties dialog select the Host Authorization tab.