Cisco Cisco TelePresence Video Communication Server Expressway
Enabling MOC/Lync clients registered on OCS/Lync Server to call endpoints registered on the video network
Cisco VCS Deployment Guide: Microsoft OCS 2007 R2, Lync 2010 and Cisco VCS X7.0
Page 55 of 104
Enabling MOC/Lync clients registered on
OCS/Lync Server to call endpoints registered
on the video network
OCS/Lync Server to call endpoints registered
on the video network
“OCS/Lync gateway” VCS Control configuration
Configure the “OCS/Lync gateway” VCS with a neighbor zone that contains the video network.
Set up one or more search rules to route calls with video network domains to the video network
(include a rule for the MCU domain if used).
(include a rule for the MCU domain if used).
Note: in small test and demo networks this configuration is not necessary as the video network Cisco
VCS is the “OCS/Lync Gateway” VCS. You can skip this section and go to “OCS/Lync Active
Directory configuration for FindMe users” on page 57.
VCS is the “OCS/Lync Gateway” VCS. You can skip this section and go to “OCS/Lync Active
Directory configuration for FindMe users” on page 57.
Configure the “OCS/Lync gateway” VCS with a neighbor zone that
contains the video network
contains the video network
1. Go to the
Zones
page (
VCS configuration > Zones
).
2. Click New.
We recommend that the connection to the “OCS/Lync gateway” VCS uses SIP over TLS to
communicate so that encrypted calls can be handled.
communicate so that encrypted calls can be handled.
3. Configure the following fields:
Name
“To Video network”
Type
Neighbor
SIP mode
On
SIP port
5061
(or the value that is the same as that configured on the video
network Cisco VCS for TLS mode SIP)
(or the value that is the same as that configured on the video
network Cisco VCS for TLS mode SIP)
SIP transport
TLS
H.323 mode
On
In the Location section:
Peer 1 address
Peer 1 address
IP address or FQDN of the video network Cisco VCS (or the 1
st
Cisco VCS in the video network cluster)
In the Location section:
Peer 2 address to Peer 6 address
Peer 2 address to Peer 6 address
IP address or FQDN of the 2
nd
to 6th video network cluster peers
(if any)
In the Advanced section:
Zone profile
Zone profile
Default
4. Click Save.