Cisco Cisco TelePresence Video Communication Server Expressway
Time
1.
Go to Settings > Time.
2.
Configure the fields as follows:
Enable NTP
Select this option
UTC offset
Configure as required for local time zone
NTP host
IP address or DNS name of NTP (time) server
3.
Click Update NTP settings.
Proxies
1.
Go to Proxies > Proxies.
2.
Click Add new proxy.
3.
Configure the fields as follows:
Name
Descriptive name (for display purposes only)
Address
Enter the IP address of the VCS in the form n.n.n.n:65080
The address must include the VCS port number (as configured in Port on B2BUA for transcoder
communications on the VCS, default 65080).
communications on the VCS, default 65080).
Outgoing
transport
(AM GW
1.0 only)
transport
(AM GW
1.0 only)
TLS
—
If the
TLS option is not displayed, obtain the “Encryption” option for the Cisco AM GW and
update the features in the Feature management section of the Upgrade page (Maintenance >
Upgrade).
Upgrade).
—
Cisco AM GW 1.1 uses the same transport for outgoing messages as the transport used in the
received messages.
received messages.
4.
Click Add proxy.
11
Microsoft Lync 2010, Cisco VCS and Cisco AM GW 3610 Deployment Guide