Cisco Cisco TelePresence Video Communication Server Expressway
Configuring the Cisco VCS
Cisco VCS Deployment Guide: Microsoft OCS 2007 R2, Cisco VCS X6.1
and Cisco AM GW 1.0
and Cisco AM GW 1.0
Page 6 of 24
Configuring the Cisco VCS
Configure the neighbor zone to the Cisco AM GW
Create a neighbor zone called, for example, “To AM Gateway”.
1. Go to the Zones page (VCS configuration > Zones).
2. Select New. You are taken to the Create zone page.
3. Configure the fields as follows:
Name
For example “To AM Gateway”
H.323 Mode
Off
H.323 Port
1719
SIP Mode
On
SIP Port
5061
SIP Transport
TLS
TLS verify mode
Off
Accept proxied
registrations
registrations
Deny
Authentication policy
Configure this setting according to your authentication policy
SIP authentication trust
mode
mode
Off
Peer 1 address
Address of first Cisco AM GW
Peer 2 .. 6 addresses
Addresses of any additional Cisco AM GWs
Zone profile
Cisco Advanced Media Gateway