Cisco Cisco TelePresence Video Communication Server Expressway
Configuring the Cisco AM GW
Proxies
1. Go to the Proxies page (Proxies > Proxies)
2. Select
Add new proxy.
3. Configure the fields as follows:
Name
Descriptive name (for display purposes only)
Address
IP address of Cisco VCS
Outgoing transport
TLS
4. Click
Add proxy.
If the Cisco AM GW is connected to a cluster of Cisco VCSs then set up proxy entries for each Cisco
VCS peer in the cluster.
VCS peer in the cluster.
Note: If the TLS option is not displayed, obtain the “Encryption” option for the Cisco AM GW and
update the features in the Feature management section of the Upgrade page (Maintenance >
Upgrade).
update the features in the Feature management section of the Upgrade page (Maintenance >
Upgrade).
Shut down and restart Cisco AM GW
The Cisco AM GW only needs to be shut down and restarted if the HD / SD setting on the Resource
settings page has been changed. If it has been changed:
settings page has been changed. If it has been changed:
1. Go to the Shutdown page (Maintenance > Shutdown)
2. Click
Shutdown AM GW and then click Confirm AM GW shutdown.
A red banner will appear confirming “AM GW SHUT DOWN. Restart required”.
Note: If the confirm is not carried out immediately the system may timeout and the procedure above
will have to be repeated.
will have to be repeated.
3. Click
Restart AM GW.
“AM GW RESTART IN PROGRESS” will confirm that a restart is occurring.
Cisco VCS Deployment Guide: Microsoft OCS 2007 R2, Cisco VCS Control X5.1
and Cisco AM GW 1.0
and Cisco AM GW 1.0
Page 14 of 24