Cisco Cisco TelePresence Video Communication Server Expressway 설치 가이드
Introduction
About This Document
This document describes how to install a Cisco TelePresence Video Communication Server CE500 appliance into your
video network. It contains information on:
video network. It contains information on:
■
Preparing the installation.
■
Installing the hardware.
■
Performing the initial configuration.
■
Troubleshooting the installation.
The Cisco VCS appliance is based on the UCS C220 M3. For more detailed information on installing this appliance, see
the
the
.
About the Cisco VCS Appliance
This product has entered the end-of-life cycle. See the
for details.
The appliance ships with the Cisco VCS software pre-installed, and you can upgrade the software if necessary.
The appliance supports Cisco VCS version X8.2 or later.
Item
Part
Quantity
Chassis
UCSC-C220-M3L
1
Processor
UCS-CPU-E5-2643 (3.30 GHz / 4 Core - Hyper threaded)
1
RAM
UCS-MR-1X082RY-A (8 GB)
2
Hard Disk
UCS-HDD1TI2F212 (1TB NL SAS Disk LFF)
2
Onboard SAS Controller
SAS support provided by UCSC-RAID-ROM1
1
NIC
N2XX-ABPCI01-M3 (Broadcom 5709 Dual Port 1 Gb)
1
PSU
UCSC-PSU-650 W & Power cable
1
TPM
UCSX-TPM1-001 (Trusted Platform Module)
1
Miscellaneous
UCSC-BBLKD-L (HDD filler panel)
3
UCSC-HS-C220M3 (Heat Sink)
1
UCSC-RAIL1 (Rail Kit)
1
UCSC-PCIF-01H (Half height PCIe filler)
1
UCSC-PSU-BLKP (Power supply blanking panel/filler)
1
The following components are field replaceable:
The only field replaceable component is the PSU.
Note:
The hard disks must not be removed.
To begin a Return Material Authorization (RMA) go to
2
Cisco Video Communication Server CE500 Appliance Installation Guide