Cisco Cisco TelePresence Video Communication Server Expressway 릴리즈 노트
New features in X7
Cisco TelePresence Video Communication Server X7.2.4 Software Release Notes
Page 14 of 50
Call processing
Improved interworking between VCS and Cisco Unified Communications Manager (CUCM). VCS
now always stays in the call signaling route for calls to neighbor zones that are configured with the
Cisco Unified Communications Manager or the Infrastructure device zone profiles.
now always stays in the call signaling route for calls to neighbor zones that are configured with the
Cisco Unified Communications Manager or the Infrastructure device zone profiles.
Virtual appliance support
The VCS can run on VMware on Cisco UCS C200 M2, UCS C210 M2, or UCS B200 M2 servers.
See Cisco VCS Virtual Machine Deployment Guide for installation instructions.
Other enhancements and usability improvements
Improved status reporting of NTP server synchronization.
The lower and upper source ports in the range used for sending DNS queries can now be
configured on the DNS page.
configured on the DNS page.
Automatically uploaded CRL files are now included when checking the validity of client certificates
on the Client certificate testing page.
on the Client certificate testing page.
System snapshot:
The snapshot process now runs in the background. This means you can navigate away from
the snapshot page and return to it later to download the generated snapshot file.
the snapshot page and return to it later to download the generated snapshot file.
Snapshot filenames are distinct for each type of snapshot.
Default incident reporting server is now https://cc-reports.cisco.com/submitapplicationerror/
The VCS Starter Pack Express supports device provisioning for MX200 endpoints.
An optional free-form description of a B2BUA transcoder can be specified.
Alarms status page now shows when an alarm was first raised.
The VCS web interface now supports Internet Explorer 7, 8 or 9, Firefox 3 or later, or Chrome.
Later versions of these browsers may also work, but are not officially supported.
Later versions of these browsers may also work, but are not officially supported.
The VCS now uses syslog-ng for logging; if syslog-ng log entries are seen these are typically
recording rotating log files.
recording rotating log files.
X7.0.3
This is a maintenance release.
X7.0.2
This is a maintenance release.
X7.0.1
This is a maintenance release.
X7.0
Device authentication using an Active Directory Service for Movi
endpoints configurable via web interface
endpoints configurable via web interface
The ability to authenticate devices via a direct connection between the Cisco VCS and an Active
Directory Service (ADS) can now be configured via the web interface.
Directory Service (ADS) can now be configured via the web interface.