Cisco Cisco TelePresence Video Communication Server Expressway 릴리즈 노트
Open caveats
Cisco TelePresence Video Communication Server X7.0.1 Software Release Notes
Page 16 of 29
Open caveats
The following issues currently apply to this version of the Cisco VCS.
Internal
reference
reference
Identifier
Summary
69881
CSCtr80148
TURN server port configuration: if the port of the TURN server is changed
while the TURN server is running, then the TURN server must be restarted
before the port change takes effect. This can be achieved by turning TURN
services Off and then On again from the TURN configuration page.
while the TURN server is running, then the TURN server must be restarted
before the port change takes effect. This can be achieved by turning TURN
services Off and then On again from the TURN configuration page.
79180
CSCtr28842
Out of date call and registration status: call and registration status displays
can be out of date if the status changes mid-call or mid-registration. The
call/registration status display is only updated when it ends. This means that the
registration out-of-resources status will not be reflected in until an MCU
unregisters.
can be out of date if the status changes mid-call or mid-registration. The
call/registration status display is only updated when it ends. This means that the
registration out-of-resources status will not be reflected in until an MCU
unregisters.
84054
CSCts02660
Seconds since last refresh and Seconds to expiry do not update on the
web interface: the Seconds since last refresh and Seconds to expiry fields
on the Registration details web page do not get updated if a manual refresh of
the web page is performed.
web interface: the Seconds since last refresh and Seconds to expiry fields
on the Registration details web page do not get updated if a manual refresh of
the web page is performed.
85593
CSCtr80162
External policy: when editing a policy service under the VCS configuration >
Dial plan > Policy services web page it is not possible to change the password
used for remote authentication. The password can however be changed via the
CLI interface or by deleting and then recreating the whole policy service with the
new password.
Dial plan > Policy services web page it is not possible to change the password
used for remote authentication. The password can however be changed via the
CLI interface or by deleting and then recreating the whole policy service with the
new password.
86253
CSCtr80175
Cisco VCS Starter Pack Express and remote authentication of login
account credentials requires lower case usernames: when setting up user
(FindMe) accounts you must enter the account usernames in lower case. If
usernames are created with mixed or upper case the user will not be able to log
in to the Cisco VCS. Note that passwords are case sensitive.
This issue applies only if you have a Cisco VCS Starter Pack Express and are
using remote (LDAP) authentication of login account credentials.
account credentials requires lower case usernames: when setting up user
(FindMe) accounts you must enter the account usernames in lower case. If
usernames are created with mixed or upper case the user will not be able to log
in to the Cisco VCS. Note that passwords are case sensitive.
This issue applies only if you have a Cisco VCS Starter Pack Express and are
using remote (LDAP) authentication of login account credentials.
88103
CSCtr77670
SIP DNS zone defaults to UDP: searches made through DNS zones use UDP
for A record lookups. They do this even if UDP is disabled at the SIP protocol
level (on the SIP page). However, if SIP UDP is disabled, the call will not
connect.
This scenario is more likely to occur in new installations of X7 software which
has SIP UDP disabled by default.
The workaround is to enable SIP UDP.
for A record lookups. They do this even if UDP is disabled at the SIP protocol
level (on the SIP page). However, if SIP UDP is disabled, the call will not
connect.
This scenario is more likely to occur in new installations of X7 software which
has SIP UDP disabled by default.
The workaround is to enable SIP UDP.
88239
CSCtr80189
Viewing web pages with IE8 in compatibility mode: there are display
problems with the Cisco VCS web interface when viewing web pages with IE8 in
compatibility mode. The workaround is to switch off IE8 compatibility mode.
problems with the Cisco VCS web interface when viewing web pages with IE8 in
compatibility mode. The workaround is to switch off IE8 compatibility mode.
88376
CSCtr77658
Cisco VCS sends SIP INFO for content channel without stream ID: when
interworking calls from H.323 to SIP, Fast Update Requests do not contain a
stream ID.
interworking calls from H.323 to SIP, Fast Update Requests do not contain a
stream ID.
116099
CSCtr84970
“transferfindmeaccounts” script fails: the “transferfindmeaccounts” script
fails to complete successfully. This script is required if you need to change the
Cluster name of your Cisco VCS and you are using FindMe (with or without
Cisco TMS).
There is no workaround for this problem; do not change the Cluster name if you
are using FindMe.
fails to complete successfully. This script is required if you need to change the
Cluster name of your Cisco VCS and you are using FindMe (with or without
Cisco TMS).
There is no workaround for this problem; do not change the Cluster name if you
are using FindMe.
116841
CSCtr84963
Possible loss of grace period for call licenses (in cluster configuration):
If a cluster peer loses contact with its cluster, the remaining peers can continue
to use the non-contactable peer’s licenses for a 2-week grace period. But, if
another peer within the cluster is restarted during that period, that restarted peer
will not be able to make use of the non-contactable peer’s licenses for the
remainder of the grace period.
to use the non-contactable peer’s licenses for a 2-week grace period. But, if
another peer within the cluster is restarted during that period, that restarted peer
will not be able to make use of the non-contactable peer’s licenses for the
remainder of the grace period.