Cisco Cisco TelePresence Video Communication Server Expressway 릴리즈 노트
New features in X6.0
Cisco TelePresence Video Communication Server X6 Software Release Notes
Page 9 of 26
User interface language packs
Multiple language support has been enabled on the Cisco VCS’s web interface. Language packs will
be made available for download in the future. Contact your Cisco support representative for more
information on supported languages.
be made available for download in the future. Contact your Cisco support representative for more
information on supported languages.
Enhanced online help
The context-sensitive help available through the Help link at the top of every page on the web
interface now contains additional conceptual and reference information. The help is fully searchable
and also includes a table of contents to aid navigation between topics. Consequently, the link from the
web interface to the PDF of the Administrator Guide has been removed (however, the PDF is still
available on the support area of the website).
interface now contains additional conceptual and reference information. The help is fully searchable
and also includes a table of contents to aid navigation between topics. Consequently, the link from the
web interface to the PDF of the Administrator Guide has been removed (however, the PDF is still
available on the support area of the website).
Cisco VCS unit LCD panel
The LCD panel on the front of the Cisco VCS hardware unit can be configured to show additional
status information. It can display the system name, all IP addresses, warnings, and the number of
current traversal calls, non-traversal calls and registrations.
status information. It can display the system name, all IP addresses, warnings, and the number of
current traversal calls, non-traversal calls and registrations.
Multiple external syslog servers
The Cisco VCS can be configured with the IP address or FQDN of up to 4 remote RFC 5424
compliant syslog servers.
compliant syslog servers.
SNMPv3 support
The Cisco VCS now supports secure SNMPv3 authentication and encryption.
Cisco Unity integration
The Cisco VCS now supports the use of Cisco Unity voicemail as an onbusy or noanswer target
voicemail device in a FindMe.
voicemail device in a FindMe.
Factory reset command
You can reset the Cisco VCS unit to a factory state by using the
factory-reset
command while
logged in as the root user.
Note:
this command should only be performed on the advice of Cisco customer support
you are recommended to only perform this command over a serial connection to the Cisco VCS
unit
unit
it reinitializes the hard disk
Changes and improvements
Web interface
The VCS configuration > Search rules menu has been renamed as VCS configuration > Dial
plan. It contains the following submenu items:
•
plan. It contains the following submenu items:
•
Configuration: used to configure how the Cisco VCS routes calls in specific call scenarios.
•
Transforms: the pre-search transforms configuration option previously found directly under
the VCS configuration main menu.
the VCS configuration main menu.