Cisco Cisco TelePresence Video Communication Server Expressway 릴리즈 노트
Resolved caveats
Cisco TelePresence Video Communication Server X6.1 Software Release Notes
Page 13 of 26
Reference
ID
ID
Summary
78410,
81372
81372
If an H.323 call is put on hold between the Cisco VCS & CUCM and a change in time
capabilities of an audio codec in a TCS happens while the call is on hold then the Cisco VCS
was not updating the time setting when reopening the H.323 OLC towards the CUCM. This
issue has now been fixed.
capabilities of an audio codec in a TCS happens while the call is on hold then the Cisco VCS
was not updating the time setting when reopening the H.323 OLC towards the CUCM. This
issue has now been fixed.
82778
A workaround has been put into the Cisco VCS to strip UPDATE from Allowed: header in all
requests and responses destined to CUCM SIP zones. This means early dialog is not
supported by the Cisco VCS and the call will now continue using other supported methods.
requests and responses destined to CUCM SIP zones. This means early dialog is not
supported by the Cisco VCS and the call will now continue using other supported methods.
Other
Reference
ID
ID
Summary
62432
Bandwidth limits can now be applied to a group of endpoints specified via URI regex in a
subzone.
subzone.
71238
When IPv4 is selected, Ethernet ports no longer send out or respond to any IPv6 messages.
75813
Sorting by priority on search rules page (and other pages) has been fixed.
77556
In scenarios where large (>2MB) CPL files are uploaded to a Cisco VCS, registrations can
fail due to the Cisco VCS becoming unresponsive during the upload of the file. This issue has
now been fixed so that the Cisco VCS still functions normally during large CPL file uploads.
fail due to the Cisco VCS becoming unresponsive during the upload of the file. This issue has
now been fixed so that the Cisco VCS still functions normally during large CPL file uploads.
79972
Fixed an edge condition where the Cisco VCS became unstable if a SIP NAPTR record was
not specified in the correct case due to the Cisco VCS being case sensitive in its matching.
not specified in the correct case due to the Cisco VCS being case sensitive in its matching.
80390
Fixed an issue where in certain situations if a Cisco VCS received an H.323 LCF off the wire
that it failed to decode it would not free up the search resource being used. This would
eventually result in the Cisco VCS being unable to accept any calls until it was restarted.
that it failed to decode it would not free up the search resource being used. This would
eventually result in the Cisco VCS being unable to accept any calls until it was restarted.
80413
An issue existed where a Cisco VCS would incorrectly match MCU prefixes against IP
address aliases for SIP calls thus stopping IP address dialing working for SIP initiated calls.
This has now been fixed so that the Cisco VCS will only match MCU prefixes against non IP
Address aliases.
address aliases for SIP calls thus stopping IP address dialing working for SIP initiated calls.
This has now been fixed so that the Cisco VCS will only match MCU prefixes against non IP
Address aliases.
80983
Fixed an edge condition where the Cisco VCS would become unstable if it received an H.460
or ASSENT traversal call from a non-traversal zone.
or ASSENT traversal call from a non-traversal zone.
82626
Fixed an issue where under very rare timing conditions the Cisco VCS could become
unstable and restart.
unstable and restart.
83314
Cisco VCS has now been made case insensitive when looking up ENUM records in NAPTR.
83773
For presence, Cisco VCS favors a 407 response over a 412 and so when presence times out
its tag, it will never be able to publish presence again. This has now been fixed so that Cisco
VCS favors 412.
its tag, it will never be able to publish presence again. This has now been fixed so that Cisco
VCS favors 412.