Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
protocols they both support and decide which protocol to use.
By default the VCS uses SPNEGO when communicating with an AD Domain Controller. It can only be enabled or
disabled through the CLI by using the command
disabled through the CLI by using the command
xConfiguration Authentication ADS SPNEGO
.
Authenticating with External Systems
The Outbound connection credentials page (Configuration > Authentication > Outbound connection credentials) is
used to configure a username and password that the VCS will use whenever it is required to authenticate with
external systems.
used to configure a username and password that the VCS will use whenever it is required to authenticate with
external systems.
For example, when the VCS is forwarding an invite from an endpoint to another VCS, that other system may have
authentication enabled and will therefore require your local VCS to provide it with a username and password.
authentication enabled and will therefore require your local VCS to provide it with a username and password.
Note that these settings are not used by traversal client zones. Traversal clients, which must always authenticate
with traversal servers before they can connect, configure their connection credentials per traversal client zone.
with traversal servers before they can connect, configure their connection credentials per traversal client zone.
148
Cisco TelePresence Video Communication Server Administrator Guide
Device Authentication