Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Platform name
Serial Numbers
Scope of software version support
VCS appliance (1
st
generation)
52A1####-52A4####
All features in versions up to and
including X8.6.1.
including X8.6.1.
Critical fixes only in later versions,
up to and including X8.8.2*.
up to and including X8.8.2*.
No support for any versions after
X8.8.2 on this hardware.
X8.8.2 on this hardware.
Small VM (OVA)
(Auto-generated)
X8.1 onwards
Medium VM (OVA)
(Auto-generated)
X8.1 onwards
Large VM (OVA)
(Auto-generated)
X8.1 onwards
CE500
†
(VCS pre-installed on UCS
C220 M3L)
52C#####
X8.1.1 onwards
CE1000
†
(VCS pre-installed on UCS
C220 M3L)
52B#####
X8.1.1 onwards
CE1100 (VCS pre-installed on UCS
C220 M4L)
C220 M4L)
52D#####
X8.6.1 onwards
Table 3 VCS Software Versions Supported by Platform (continued)
* As of 12
th
). X8.6.1 is the last version on which you will receive support for all the features included in the
software. However, we may encourage you to upgrade to later releases to address critical issues (for example,
security vulnerabilities). In this case, we will not support any of the newer features in those releases on these legacy
platforms. Ask your Cisco representative about migrating to a newer platform.
security vulnerabilities). In this case, we will not support any of the newer features in those releases on these legacy
platforms. Ask your Cisco representative about migrating to a newer platform.
† As of 26
th
for other important dates in the lifecycle of these platforms.
About This Guide
This guide has been divided into several sections, providing conceptual, configuration and reference information
about the various features and capabilities of the VCS. It describes a fully equipped version of the VCS. Your version
may not have all the described extensions installed.
about the various features and capabilities of the VCS. It describes a fully equipped version of the VCS. Your version
may not have all the described extensions installed.
Most configuration tasks on the VCS can be performed by using either the web interface or a command line interface
(CLI). This guide mainly describes how to use the web interface. Some VCS features are only available through the
CLI and these are described as appropriate, including the relevant CLI command.
(CLI). This guide mainly describes how to use the web interface. Some VCS features are only available through the
CLI and these are described as appropriate, including the relevant CLI command.
In this guide, instructions for performing a task using the web interface are shown in the format Menu > Submenu
followed by the Name of the page that you will be taken to.
followed by the Name of the page that you will be taken to.
Where command line interface (CLI) commands are included, they are shown in the format:
xConfiguration <Element> <SubElement>
xCommand <Command>
xCommand <Command>
Related Documentation
for a full list of documents and web sites referenced in this guide.
Training
Training is available online and at our training locations. For more information on all the training we provide and where
our training offices are located, visit
our training offices are located, visit
.
15
Cisco TelePresence Video Communication Server Administrator Guide
Introduction