Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
IP Status
The IP status page (Status > System > IP) shows the current IP settings of the VCS.
The following information is displayed:
Field
Description
IP section:
Protocol
Indicates the IP protocol supported by the VCS:
■
IPv4 only: it only accepts registrations from endpoints using an IPv4 address, and only takes
calls between two endpoints communicating via IPv4. It communicates with other systems via
IPv4 only.
calls between two endpoints communicating via IPv4. It communicates with other systems via
IPv4 only.
■
IPv6 only: it only accepts registrations from endpoints using an IPv6 address, and only takes
calls between two endpoints communicating via IPv6. It communicates with other systems via
IPv6 only.
calls between two endpoints communicating via IPv6. It communicates with other systems via
IPv6 only.
■
Both: it accepts registrations from endpoints using either an IPv4 or IPv6 address, and takes
calls using either protocol. If a call is between an IPv4-only and an IPv6-only endpoint, the
VCS acts as an IPv4 to IPv6 gateway. It communicates with other systems via either protocol.
calls using either protocol. If a call is between an IPv4-only and an IPv6-only endpoint, the
VCS acts as an IPv4 to IPv6 gateway. It communicates with other systems via either protocol.
IPv4
gateway
gateway
The IPv4 gateway used by VCS.
IPv6
gateway
gateway
The IPv6 gateway used by VCS.
Advanced
Networking
Networking
Indicates whether the second LAN port has been enabled. This is done by installing the Advanced
Networking option key.
Networking option key.
LAN 1
Shows the IPv4 address and subnet mask, and IPv6 address of the LAN 1 port.
LAN 2
If the Advanced Networking option key has been installed, this shows the IPv4 address and subnet
mask, and IPv6 address of the LAN 2 port.
mask, and IPv6 address of the LAN 2 port.
DNS section:
Server 1..5
address
address
The IP addresses of each of the DNS servers that are queried when resolving domain names. Up to 5
DNS servers may be configured.
DNS servers may be configured.
Domain
Specifies the name to be appended to the host name before a query to the DNS server is executed.
page.
Resource Usage
The Resource usage page (Status > System > Resource usage) provides statistics about the current and cumulative
license usage for calls and registrations.
license usage for calls and registrations.
It shows current and peak (highest concurrent) usage broken down by:
■
Unified CM remote session calls (if Unified Communications Mobile and remote access is enabled)
■
Traversal calls
■
Non-traversal calls
■
SIP traversal audio-only calls
■
TURN relays (VCS Expressway only)
It also displays resource and license usage information:
337
Cisco TelePresence Video Communication Server Administrator Guide
Overview and Status Information