Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
String
Represents value returned by...
When used in a Pattern field
When used in a
Replace field
Replace field
%ipv6_1%
xConfiguration Ethernet 1 IP V6
Address
Address
Matches the IPv6 address
currently configured for LAN
1.
currently configured for LAN
1.
Applies to all peer addresses if
the VCS is part of a cluster.
the VCS is part of a cluster.
Replaces the string
with the LAN 1 IPv6
address.
with the LAN 1 IPv6
address.
If the VCS is part of
a cluster, the
address of the local
peer is always used.
a cluster, the
address of the local
peer is always used.
%ipv6_2%
xConfiguration Ethernet 2 IP V6
Address
Address
Matches the IPv6 address
currently configured for LAN
2.
currently configured for LAN
2.
Applies to all peer addresses if
the VCS is part of a cluster.
the VCS is part of a cluster.
Replaces the string
with the LAN 2 IPv6
address.
with the LAN 2 IPv6
address.
If the VCS is part of
a cluster, the
address of the local
peer is always used.
a cluster, the
address of the local
peer is always used.
%localdomains%
xConfiguration SIP Domains Domain 1
Name
...
xConfiguration SIP Domains Domain
200 Name
Name
...
xConfiguration SIP Domains Domain
200 Name
Matches all the SIP domains
currently configured on the
VCS.
currently configured on the
VCS.
not applicable
%localdomain1%
...
%localdomain200%
...
%localdomain200%
xConfiguration SIP Domains Domain 1
Name
...
xConfiguration SIP Domains Domain
200 Name
Name
...
xConfiguration SIP Domains Domain
200 Name
Matches the specified SIP
domain. Up to 200 SIP
domains can be configured on
the VCS, and they are
identified by an index number
between 1 and 200.
domain. Up to 200 SIP
domains can be configured on
the VCS, and they are
identified by an index number
between 1 and 200.
Replaces the string
with the specified
SIP domain.
with the specified
SIP domain.
%systemname%
xConfiguration SystemUnit Name
Matches the VCS’s System
Name.
Name.
Replaces the string
with the VCS’s
System Name.
with the VCS’s
System Name.
You can test whether a pattern matches a particular alias and is transformed in the expected way by using the
tool (Maintenance > Tools > Check pattern).
Port Reference
The following tables list the IP ports and protocols used by VCS for general services and functions. Also see:
■
■
■
The tables show the generic defaults for each service, many of which are configurable. The actual services and ports
used on your system will vary depending on its configuration, the option keys installed and features that have been
enabled. A specific list of all the IP ports in use on a particular VCS can be viewed via the port usage pages
(Maintenance > Tools > Port usage).
used on your system will vary depending on its configuration, the option keys installed and features that have been
enabled. A specific list of all the IP ports in use on a particular VCS can be viewed via the port usage pages
(Maintenance > Tools > Port usage).
When Advanced Networking is enabled, all ports configured on the VCS, including those relating to firewall traversal,
apply to both IP addresses; you cannot configure ports separately for each IP address.
apply to both IP addresses; you cannot configure ports separately for each IP address.
Local VCS Inbound/Outbound Ports
These are the IP ports on the VCS used to receive (inbound) or send (outbound) communications with other systems.
367
Cisco TelePresence Video Communication Server Administrator Guide