Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Local Zone Status
The Local Zone status page (Status > Local Zone) lists all of the subzones on the VCS that together make up the
Local Zone. This always includes the Default Subzone and the Traversal Subzone, plus any other subzones that have
been configured.
Local Zone. This always includes the Default Subzone and the Traversal Subzone, plus any other subzones that have
been configured.
The following information is displayed:
Field
Description
Subzone
name
name
The names of each subzone currently configured on this VCS.
Clicking on a Subzone name takes you to the configuration page for that subzone.
Clicking on a Subzone name takes you to the configuration page for that subzone.
Registrations The number of devices currently registered within the subzone. Note that devices cannot be
registered to the Traversal Subzone.
Calls
The number of calls currently passing through the subzone. Note that a single call may pass
through more than one subzone, depending on the route it takes. For example, traversal calls from
a locally registered endpoint will always pass through the Traversal Subzone, so they will show up
twice; once in the originating subzone and once in the Traversal Subzone.
a locally registered endpoint will always pass through the Traversal Subzone, so they will show up
twice; once in the originating subzone and once in the Traversal Subzone.
Bandwidth
used
used
The total amount of bandwidth used by all calls passing through the subzone.
Zone Status
The Zone status page (Status > Zones) lists all of the external zones on the VCS. It shows the number of calls and
amount of bandwidth being used by each zone.
amount of bandwidth being used by each zone.
The list of zones always includes the Default Zone, plus any other zones that have been created.
The following information is displayed:
Field
Description
Name
The names of each zone currently configured on this VCS.
Clicking on a zone Name takes you to the configuration page for that zone.
Type
The type of zone.
Calls
The number of calls currently passing out to or received in from each zone.
Bandwidth
used
used
The total amount of bandwidth used by all calls passing out to or received in from each zone.
H.323 / SIP
status
status
Indicates the zone's H.323 or SIP connection status:
■
Off: the protocol is disabled at either the zone or system level
■
Active: the protocol is enabled for that zone and it has at least one active connection; if
multiple connections are configured and some of those connections have failed, the display
indicates how many of the connections are Active
multiple connections are configured and some of those connections have failed, the display
indicates how many of the connections are Active
■
On: applies to DNS and ENUM zones only and indicates that the protocol is enabled for that
zone
zone
■
Failed: the protocol is enabled for that zone but its connection has failed
■
Checking: the protocol is enabled for that zone and the system is currently trying to establish a
connection
connection
Search
rule status
rule status
This area is used to indicate if that zone is not a target of any search rules.
324
Cisco TelePresence Video Communication Server Administrator Guide
Overview and Status Information