Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Go to Users > Administrator accounts. Under Actions for the relevant administrator account, click Change
password.
password.
A new page is displayed, where you can change the password for the selected administrator. Enter the new
password and confirm it. You must also enter the password for the administrator account with which you are
currently logged in to authorize the password change.
password and confirm it. You must also enter the password for the administrator account with which you are
currently logged in to authorize the password change.
Resetting Root or Admin Password via Serial Connection
On a hardware VCS, reset the admin or root password as follows:
1.
. Serial
port / console access is always enabled for one minute following a restart, even if it is normally disabled.
2.
Restart the VCS.
3.
Log in from the PC with the username pwrec. No password is required.
4.
If the administrator account authentication source is set to Remote, you are given the option to change the
setting to Both; this will allow local administrator accounts to access the system.
setting to Both; this will allow local administrator accounts to access the system.
5.
Select the account (root or admin) whose password you want to change.
6.
You will be prompted for a new password.
The pwrec account is only active for one minute following a restart. After that time you will have to restart the system
again to change the password.
again to change the password.
Resetting Root or Admin Password via vSphere
If you have forgotten the password for either an administrator account or the root account and you are using a VM
(Virtual Machine) VCS, you can reset it using the following procedure:
(Virtual Machine) VCS, you can reset it using the following procedure:
1.
Open the vSphere client.
2.
Click on the link Launch Console.
2.
Reboot the VCS.
3.
In the vSphere console log in with the username
pwrec
. No password is required.
4.
When prompted, select the account (root or the username of the administrator account) whose password you
want to change.
want to change.
5.
You will be prompted for a new password.
The pwrec account is only active for one minute following a reboot. After that time you will have to reboot the system
again to reset the password.
again to reset the password.
Resetting FindMe Account Passwords
To change a password on behalf of a FindMe user without knowing their existing password (for example, when a user
forgets their password):
forgets their password):
1.
Go to the Edit FindMe account page (Users > FindMe accounts, then click View/Edit or the username) for the
account whose password you want to reset.
account whose password you want to reset.
2.
Enter the new password to be used when logging into this account into the New password and Confirm
password fields and click Save.
password fields and click Save.
is enabled,
passwords are managed through your remote directory server instead.
278
Cisco TelePresence Video Communication Server Administrator Guide