Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Field
Description
Usage tips
Zone profile
Determines how the zone's advanced settings
are configured.
are configured.
Default: uses the factory default profile.
Custom: allows you to configure each setting
individually.
individually.
Alternatively. choose one of the preconfigured
profiles to automatically use the appropriate
settings required for connections to that type of
system. The options include:
profiles to automatically use the appropriate
settings required for connections to that type of
system. The options include:
n
Cisco Unified Communications Manager
n
Cisco Unified Communications Manager
(8.6.1 or later)
(8.6.1 or later)
n
Nortel Communication Server 1000
n
Infrastructure device (typically used for non-
gatekeeper devices such as an MCU)
gatekeeper devices such as an MCU)
Only use the Custom profile to configure the
individual advanced settings on the advice of
Cisco customer support.
individual advanced settings on the advice of
Cisco customer support.
information about the Cisco Unified
Communications Manager profiles.
Communications Manager profiles.
Configuring traversal client zones
To traverse a firewall, the VCS must be connected with a traversal server (typically, a VCS Expressway).
In this situation your local VCS is a traversal client, so you create a connection with the traversal server by
creating a traversal client zone on your local VCS. You then configure the client zone with details of the
corresponding zone on the traversal server. (The traversal server must also be configured with details of the
VCS client zone.)
creating a traversal client zone on your local VCS. You then configure the client zone with details of the
corresponding zone on the traversal server. (The traversal server must also be configured with details of the
VCS client zone.)
After you have neighbored with the traversal server you can:
n
use the neighbor as a traversal server
n
query the traversal server about its endpoints
n
apply transforms to any queries before they are sent to the traversal server
n
control the bandwidth used for calls between your local VCS and the traversal server
For full details on how traversal client zones and traversal server zones work together to achieve firewall
traversal, see
traversal, see
.
must be configured for traversal zones to work.
The configurable options for a traversal client zone are:
Field
Description
Usage tips
Configuration
section:
Name
The name acts as a unique identifier, allowing you
to distinguish between zones of the same type.
to distinguish between zones of the same type.
Type
The nature of the specified zone, in relation to the
local VCS. Select Traversal client.
local VCS. Select Traversal client.
After a zone has been created, the
Type cannot be changed.
Type cannot be changed.
Cisco TelePresence Video Communication Server Administrator Guide (X8.5)
Page 177 of 559
Zones and neighbors
Configuring zones