Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Call status and call history now indicates components routed through the B2BUA for encryption or ICE
support with a component type of 'B2BUA' (formerly 'Encryption B2BUA').
support with a component type of 'B2BUA' (formerly 'Encryption B2BUA').
Note: The combination of having static NAT mode on and having the B2BUA engaged to do media
encryption/decryption can cause the firewall outside the VCS Expressway to mistrust packets originating
from the VCS Expressway. You can work around this by configuring the firewall to allow NAT reflection. If
your firewall cannot allow this, you must configure the traversal path such that the B2BUA on the VCS
Expressway is not engaged.
encryption/decryption can cause the firewall outside the VCS Expressway to mistrust packets originating
from the VCS Expressway. You can work around this by configuring the firewall to allow NAT reflection. If
your firewall cannot allow this, you must configure the traversal path such that the B2BUA on the VCS
Expressway is not engaged.
X8.1.1
Unified Communications: mobile and remote access
Cisco Unified Communications mobile and remote access is a core part of the Cisco Collaboration Edge
Architecture. It allows endpoints such as Cisco Jabber to have their registration, call control, provisioning,
messaging and presence services provided by Cisco Unified Communications Manager (Unified CM) when
the endpoint is not within the enterprise network. The VCS provides secure firewall traversal and line-side
support for Unified CM registrations.
Architecture. It allows endpoints such as Cisco Jabber to have their registration, call control, provisioning,
messaging and presence services provided by Cisco Unified Communications Manager (Unified CM) when
the endpoint is not within the enterprise network. The VCS provides secure firewall traversal and line-side
support for Unified CM registrations.
Support to modify Maximum transmission unit (MTU) size
You can configure the maximum transmission unit (MTU) for each network interface on the
System > IP
page.
Diagnostic logging
The tcpdump facility has been removed from the
Diagnostic logging
tool.
Jabber Guest
Jabber Guest support has been removed (it was previously provided as a feature preview in X8.1). It will be
reintroduced in a future release of VCS software.
reintroduced in a future release of VCS software.
X8.1
Microsoft Lync 2013 / H.264 SVC support
The Microsoft Lync B2BUA now supports calls to and from Microsoft Lync 2013 clients. It provides
interworking between standard H.264 AVC and Lync 2013's H.264UC SVC codec. To use Lync 2013 you
must install the Microsoft Interoperability option key (formerly known as the Enhanced OCS
Collaboration option key). Note that for Lync 2010, the Microsoft Interoperability option key requirements
remain as per previous releases (i.e. it is required for encrypted calls to and from Microsoft Lync Server and
for establishing ICE calls to Lync clients).
interworking between standard H.264 AVC and Lync 2013's H.264UC SVC codec. To use Lync 2013 you
must install the Microsoft Interoperability option key (formerly known as the Enhanced OCS
Collaboration option key). Note that for Lync 2010, the Microsoft Interoperability option key requirements
remain as per previous releases (i.e. it is required for encrypted calls to and from Microsoft Lync Server and
for establishing ICE calls to Lync clients).
Presentation sharing via Lync 2013 is supported but only from VCS to Lync.
Support for standards-based H.264 SVC codecs
The B2BUA now supports calls to standards-based H.264 SVC codecs.
Cisco TelePresence Video Communication Server Administrator Guide (X8.5)
Page 542 of 559
Reference material
Software version history