Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Clustering and Cisco TMS
Cisco TMS version 13.2 or later is mandatory if your cluster is configured to use FindMe or Device
Provisioning. From X8.1 onwards you must use Cisco TelePresence Management Suite Provisioning
Extension.
Provisioning. From X8.1 onwards you must use Cisco TelePresence Management Suite Provisioning
Extension.
Size limitations for clusters and provisioning
A VCS cluster of any size supports up to:
n
10,000 FindMe accounts
n
10,000 users for provisioning
n
200,000 phonebook entries
Note that:
n
systems can support up to 2,500 device registrations per peer, subject to a maximum of
10,000 registrations per cluster. Typically this means one device per FindMe account.
n
registrations per cluster). However, you are still limited to 10,000 FindMe accounts/users and 10,000
provisioned devices per cluster.
provisioned devices per cluster.
If you need to provision more than 10,000 devices, your network will require additional VCS clusters with an
appropriately designed and configured dial plan.
appropriately designed and configured dial plan.
with Cisco TMS.
About the Cluster Subzone
When two or more VCSs are clustered together, a new subzone is created within the cluster’s Local Zone.
This is the Cluster Subzone (see the diagram in the
This is the Cluster Subzone (see the diagram in the
peers in the cluster will briefly pass via this subzone during call setup.
The Cluster Subzone is (like the Traversal Subzone) a virtual subzone used for call routing only, and
endpoints cannot register to this subzone. After a call has been established between two peers, the Cluster
Subzone will no longer appear in the call route and the call will appear as having come from (or being routed
to) the Default Subzone.
endpoints cannot register to this subzone. After a call has been established between two peers, the Cluster
Subzone will no longer appear in the call route and the call will appear as having come from (or being routed
to) the Default Subzone.
The two situations in which a call will pass via the Cluster Subzone are:
n
Calls between two endpoints registered to different peers in the cluster.
For example, Endpoint A is registered in the Default Subzone to Peer 1. Endpoint B is also registered in the
Default Subzone, but to Peer 2. When A calls B, the call route is shown on Peer 1 as Default Subzone ->
Cluster Subzone, and on Peer 2 as Cluster Subzone -> Default Subzone.
For example, Endpoint A is registered in the Default Subzone to Peer 1. Endpoint B is also registered in the
Default Subzone, but to Peer 2. When A calls B, the call route is shown on Peer 1 as Default Subzone ->
Cluster Subzone, and on Peer 2 as Cluster Subzone -> Default Subzone.
n
Calls received from outside the cluster by one peer, for an endpoint registered to another peer.
For example, we have a single VCS for the Branch Office, which is neighbored to a cluster of 4 VCSs at the
Head Office. A user in the Branch Office calls Endpoint A in the Head Office. Endpoint A is registered in the
Default Subzone to Peer 1. The call is received by Peer 2, as it has the lowest resource usage at that
moment. Peer 2 then searches for Endpoint A within the cluster’s Local Zone, and finds that it is registered
to Peer 1. Peer 2 then forwards the call to Peer 1, which forwards it to Endpoint A. In this case, on Peer 2
For example, we have a single VCS for the Branch Office, which is neighbored to a cluster of 4 VCSs at the
Head Office. A user in the Branch Office calls Endpoint A in the Head Office. Endpoint A is registered in the
Default Subzone to Peer 1. The call is received by Peer 2, as it has the lowest resource usage at that
moment. Peer 2 then searches for Endpoint A within the cluster’s Local Zone, and finds that it is registered
to Peer 1. Peer 2 then forwards the call to Peer 1, which forwards it to Endpoint A. In this case, on Peer 2
Cisco TelePresence Video Communication Server Administrator Guide (X8.5.1)
Page 202 of 563
Clustering and peers
Managing clusters and peers