Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Status overview
The
Overview
page (
Status > Overview
) provides an overview of the current status of the VCS (or VCS
cluster, if applicable). This page is displayed by default after logging in to the VCS as an administrator.
The following information is displayed:
Field
Description
System information
: many of the items in this section are configurable; click on the item name to go to its
configuration page.
System name
The name that has been assigned to the VCS.
Up time
The amount of time that has elapsed since the system last restarted.
Software version
The version of software that is currently installed on the VCS.
IPv4 address
The VCS’s IPv4 addresses.
IPv6 address
The VCS’s IPv6 addresses.
Options
The maximum number of calls and registrations, and the availability of additional VCS
features such as TURN Relays, FindMe™, Device Provisioning and Advanced Networking,
are controlled through the use of
features such as TURN Relays, FindMe™, Device Provisioning and Advanced Networking,
are controlled through the use of
. This section shows all the options that are
currently installed on the VCS.
Resource usage
This section provides statistics about the current and cumulative license usage for calls and registrations.
It shows current and peak (highest concurrent) usage broken down by:
n
Unified CM remote session calls (if Unified Communications Mobile and remote access is enabled)
n
Traversal calls
n
Non-traversal calls
n
SIP traversal audio-only calls
n
Registrations
n
TURN relays (VCS Expressway only)
It also displays resource and license usage information:
n
Monitored resource usage, expressed as a percentage of the system capacity.
n
Current and peak license usage, expressed as a percentage of the available licenses for each license type.
Each traversal call license allows either 1 video call or 2 audio-only SIP calls. Hence, a 100 traversal call
license would allow, for example, 90 video and 20 SIP audio-only simultaneous calls. Any other audio-only
call (non-traversal, H.323 or interworked) will consume a standard video call license (traversal or non-
traversal as appropriate).
Each traversal call license allows either 1 video call or 2 audio-only SIP calls. Hence, a 100 traversal call
license would allow, for example, 90 video and 20 SIP audio-only simultaneous calls. Any other audio-only
call (non-traversal, H.323 or interworked) will consume a standard video call license (traversal or non-
traversal as appropriate).
You can view details of current calls or registrations by clicking on the relevant item in the section.
All statistics are based on data since the system was last restarted. The information on this page refreshes
automatically every 5 seconds.
automatically every 5 seconds.
Total usage statistics are also shown (unless Unified Communications Mobile and remote access is
enabled, in which case this data is shown on the
enabled, in which case this data is shown on the
Resource usage
page only).
Cisco TelePresence Video Communication Server Administrator Guide (X8.5.1)
Page 361 of 563
Overview and status information
Status overview