Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
About zones
A zone is a collection of endpoints, either all registered to a single system or located in a certain way such as
via an ENUM or DNS lookup. Zones are used to:
via an ENUM or DNS lookup. Zones are used to:
n
control through links whether calls can be made between your local subzones and these other zones
n
manage the bandwidth of calls between your local subzones and endpoints in other zones
n
search for aliases that are not registered locally
n
n
You can configure up to 1000 zones. Each zone is configured as one of the following zone types:
n
: a connection to a neighbor system of the local VCS.
n
: the local VCS is a traversal client of the system being connected to, and there is a firewall
between the two.
n
: the local VCS is a traversal server for the system being connected to, and there is a
firewall between the two.
n
: the zone contains endpoints discoverable by ENUM lookup.
n
: the zone contains endpoints discoverable by DNS lookup.
.
n
types.
n
section for information about including zones as
targets for search rules.
Automatically generated neighbor zones
The VCS may automatically generate some non-configurable neighbor zones:
n
A VCS Control automatically generates neighbor zones between itself and each discovered Unified CM
node when the system is configured for
node when the system is configured for
.
n
A VCS automatically generates a neighbor zone named "To Microsoft Lync server via B2BUA" when the
Cisco VCS Administrator Guide (X8.1)
Page 136 of 504
Zones and neighbors
About zones