Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Bandwidth control
Cisco VCS Administrator Guide (X7.2)
Page 221 of 498
Field
Description
Usage tips
Priority
The order in which the rules are applied (and thus
to which subzone the endpoint is assigned) if an
endpoint's address satisfies multiple rules.
to which subzone the endpoint is assigned) if an
endpoint's address satisfies multiple rules.
The rules with the highest priority (1, then 2,
then 3 and so on) are applied first. If
multiple Subnet rules have the same
priority, the rule with the largest prefix length
is applied first. Alias pattern match rules at
the same priority are searched in
configuration order.
then 3 and so on) are applied first. If
multiple Subnet rules have the same
priority, the rule with the largest prefix length
is applied first. Alias pattern match rules at
the same priority are searched in
configuration order.
Type
Determines how a device's address is checked:
Subnet: assigns the device if its IP address falls
within the configured IP address subnet.
within the configured IP address subnet.
Alias pattern match: assigns the device if its alias
matches the configured pattern.
matches the configured pattern.
Pattern matching is useful, for example, for
home workers on dynamic IP addresses;
rather than having to continually update the
subnet to match what has been allocated,
you can match against their alias instead.
home workers on dynamic IP addresses;
rather than having to continually update the
subnet to match what has been allocated,
you can match against their alias instead.
Subnet
address and
Prefix length
address and
Prefix length
These two fields together determine the range of
IP addresses that will belong to this subzone.
IP addresses that will belong to this subzone.
The Address range field shows the range of IP
addresses to be allocated to this subzone, based
on the combination of the Subnet address and
Prefix length.
addresses to be allocated to this subzone, based
on the combination of the Subnet address and
Prefix length.
Applies only if the Type is Subnet.
Pattern type
How the Pattern string must match the alias for
the rule to be applied. Options are:
the rule to be applied. Options are:
Exact: the entire string must exactly match the
alias character for character.
alias character for character.
Prefix: the string must appear at the beginning of
the alias.
the alias.
Suffix: the string must appear at the end of the
alias.
alias.
Regex: treats the string as a
.
Applies only if the Type is Alias pattern
match.
match.
Pattern string
The pattern against which the alias is compared.
Applies only if the Type is Alias pattern
match.
match.
Target
subzone
subzone
The subzone to which an endpoint is assigned if
its address satisfies this rule.
its address satisfies this rule.
State
Indicates if the rule is enabled or not.
Use this setting when making or testing
configuration changes, or to temporarily
enable or disable certain rules. Any
disabled rules still appear in the rules list
but are ignored.
configuration changes, or to temporarily
enable or disable certain rules. Any
disabled rules still appear in the rules list
but are ignored.
Applying bandwidth limitations to subzones
You can apply bandwidth limits to the Default Subzone, Traversal Subzone and all manually configured
subzones. The limits you can apply vary depending on the type of subzone, as follows:
subzones. The limits you can apply vary depending on the type of subzone, as follows: