Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Maintenance
Cisco VCS Administrator Guide (X7.2)
Page 288 of 498
Configuring language settings
The
Language
page (
Maintenance > Language
) controls which language is used for text displayed in the
web user interface.
You can also get to the
Language
page by clicking on the
Language
link at the
bottom of every page.
Changing the language
You can configure both the default language and the language to use on an individual browser:
Field
Description
Usage tips
System
default
language
default
language
The default language used on the web
interface.
interface.
You can select from the set of installed language packs.
This
browser
browser
The language used by the current browser
on the current client computer. It can be set
to use either the system default language or
a specific alternative language.
on the current client computer. It can be set
to use either the system default language or
a specific alternative language.
This setting applies to the browser currently in use on
the client computer. If you access the VCS user
interface using a different browser or a different
computer, a different language setting may be in place.
the client computer. If you access the VCS user
interface using a different browser or a different
computer, a different language setting may be in place.
Installing language packs
You can install new language packs or install an updated version of an existing language pack.
Language packs are downloaded from the same area on cisco.com from where you obtain your VCS
software files. All available languages are contained in one language pack zip file. Download the appropriate
language pack version that matches your software release.
software files. All available languages are contained in one language pack zip file. Download the appropriate
language pack version that matches your software release.
After downloading the language pack, unzip the file to extract a set of .tlp files, one per supported language.
To install a .tlp language:
1. Go to the
Language
page (
Maintenance > Language
).
2. Click Browse and select the .tlp language pack file you want to upload.
3. Click Install.
The selected language pack is then verified and uploaded.
4. Repeat steps 2 and 3 for any other languages you want to install.
For the list of available languages, see the relevant release notes for your software version.
Note that:
n
English (en_us) is installed by default and is always available.
n
You cannot create your own language packs. Language packs can be obtained only from Cisco.
n
If you upgrade to a later version of VCS software you may need to install a later version of the associated
language pack to ensure that all text is available in the chosen language.
language pack to ensure that all text is available in the chosen language.