Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Network and system settings
Cisco VCS Administrator Guide (X7.2)
Page 66 of 498
Network services
Configuring system name and access settings
The
System administration
page (
System > System
) is used to configure the name of the VCS and the
means by which it is accessed by administrators.
Configuring the system name
The System name is used to identify the VCS. It appears in various places in the web interface, and in the
display on the front panel of the unit (so that you can identify it when it is in a rack with other systems). The
System name is also used by TMS.
display on the front panel of the unit (so that you can identify it when it is in a rack with other systems). The
System name is also used by TMS.
You are recommended to give the VCS a name that allows you to easily and uniquely identify it.
Administration access
While it is possible to administer the VCS via a PC connected directly to the unit via a serial cable, you may
want to access the system remotely over IP. You can do this using either or both:
want to access the system remotely over IP. You can do this using either or both:
n
the web interface, via HTTPS
n
a command line interface, via SSH or Telnet
The configurable options are:
Field
Description
Usage tips
Session time
out
out
The number of minutes that
an administration session
(serial port, HTTPS, Telnet or
SSH) or a user (FindMe)
session may be inactive
before the session is timed
out. Default is 30 minutes.
an administration session
(serial port, HTTPS, Telnet or
SSH) or a user (FindMe)
session may be inactive
before the session is timed
out. Default is 30 minutes.
A value of 0 means that session time outs are disabled.
Per-account
session limit
session limit
The number of concurrent
sessions that each individual
administrator account is
allowed on each VCS.
sessions that each individual
administrator account is
allowed on each VCS.
This includes web, SSH, Telnet and serial sessions. Note that
session limits are not enforced on user (FindMe) accounts or the
root account.
session limits are not enforced on user (FindMe) accounts or the
root account.
A value of 0 turns session limits off.
System
session limit
session limit
The maximum number of
concurrent administrator
sessions allowed on each
VCS.
concurrent administrator
sessions allowed on each
VCS.
This includes web, SSH, Telnet and serial sessions. Note that
session limits are not enforced on user (FindMe) accounts or the
root account; however active root account sessions do count
towards the total number of current administrator sessions.
session limits are not enforced on user (FindMe) accounts or the
root account; however active root account sessions do count
towards the total number of current administrator sessions.
A value of 0 turns session limits off.
Serial port /
console
console
Determines whether the
system can be accessed
locally via either the serial
port (for a physical system) or
VMware console (for a virtual
machine). Default is On.
system can be accessed
locally via either the serial
port (for a physical system) or
VMware console (for a virtual
machine). Default is On.
Serial port / console access is always enabled for one minute
following a restart, even if it is normally disabled.
following a restart, even if it is normally disabled.