Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼

다운로드
페이지 498
Device authentication
Cisco VCS Administrator Guide (X7.2)
Page 99 of 498
See
for more information about how to configure and
troubleshoot device authentication.
Configuring VCS authentication policy
Authentication policy is applied by the VCS at the zone and subzone levels. It controls how the VCS
challenges incoming messages (for provisioning, registration, presence, phonebooks and calls) from that
zone or subzone and whether those messages are rejected, treated as authenticated, or treated as
unauthenticated within the VCS.
Each zone and subzone can set its Authentication policy to either Check credentialsDo not check
credentials
, or Treat as authenticated.
n
Registration authentication is controlled by the Default Subzone (or relevant alternative subzone)
configuration.
n
Initial provisioning subscription request authentication is controlled by the Default Zone configuration.
n
Call, presence, and phonebook request authentication is controlled by the Default Subzone (or relevant
alternative subzone) if the endpoint is registered, or by the Default Zone if the endpoint is not registered.
Note that the exact authentication policy behavior depends on whether the messages are H.323 messages,
SIP messages received from local domains, or SIP messages received from non-local domains. See
for a full description of the various authentication policy
behaviors.
Zone-level authentication policy
Authentication policy is configurable for zones that receive messaging; the Default Zone, neighbor zones,
traversal client and traversal server zones all allow configuration of authentication policy; DNS and ENUM
zones do not receive messaging and so have no configuration.
To configure a zone's Authentication policy, go to the
Edit zone
page (
VCS configuration > Zones
> Zones
, then click View/Edit or the name of the zone). The policy is set to Do not check credentials by
default when a new zone is created.
Subzone-level authentication policy
Authentication policy is configurable for the Default Subzone and any other configured subzone.
To configure a subzone's Authentication policy, go to the
Edit subzone
page (
VCS configuration >
Local Zone > Subzones
, then click View/Edit or the name of the subzone). The policy is set to Do not
check credentials by default when a new subzone is created.
Provisioning and device authentication
The Provisioning Server requires that any provisioning or phone book requests it receives have already been
authenticated at the zone or subzone point of entry into the VCS. The Provisioning Server does not do its
own authentication challenge and will reject any unauthenticated messages.
See
for more information.
Presence and device authentication
The Presence Server on VCS accepts presence PUBLISH messages only if they have already been
authenticated: