Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼

다운로드
페이지 479
Bandwidth control
Cisco VCS Administrator Guide (X7.1)
Page 213 of 479
n
manually through the web interface
n
automatically by using the CLI command xCommand DefaultLinksAdd
Automatically created links
Whenever a new subzone or zone is created, links are automatically created as follows:
New zone/subzone type
Default links are created to...
Subzone
Default Subzone and Traversal Subzone
Neighbor zone
Default Subzone and Traversal Subzone
DNS zone
Default Subzone and Traversal Subzone
ENUM zone
Default Subzone and Traversal Subzone
Traversal client zone
Traversal Subzone
Traversal server zone
Traversal Subzone
Along with the pre-configured default links this ensures that, by default, any new subzone or zone has
connectivity to all other subzones and zones. You may rename, delete and amend any of these default links.
Note: calls will fail if links are not configured correctly. You can check whether a call will succeed, and what
bandwidth will be allocated to it, using the CLI command xCommand CheckBandwidth.
Configuring pipes
Pipes are used to control the amount of bandwidth used on calls between specific subzones and zones. To
apply these limits, you must first create a pipe and configure it with the required bandwidth limitations. Then
when configuring
you assign the pipe to one or more links. Calls using the link will then have the pipe’s
bandwidth limitations applied to them. See
for more information.
The
Pipes
page (
VCS configuration > Bandwidth > Pipes
) lists all the pipes that have been configured on
the VCS and allows you to create, edit and delete pipes.
The following information is displayed:
Field
Description
Name
The name of the pipe.
Total
bandwidth
The upper limit on the total bandwidth used at any one time by all calls on all links to which this
pipe is applied.
Per call
bandwidth
The maximum bandwidth of any one call on the links to which this pipe is applied.
Calls
Shows the total number of calls currently traversing all links to which the pipe is applied.
Bandwidth
used
Shows the total amount of bandwidth currently being consumed by all calls traversing all links to
which the pipe is applied.
You can configure up to 1000 pipes.