Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Maintenance
Cisco VCS Administrator Guide (X7.1)
Page 274 of 479
About login accounts
The VCS has two types of login account for normal operation:
n
Administrator accounts: used to configure the VCS.
n
User accounts: used by individuals in an enterprise to configure their FindMe profile. They can also be
used to enable basic device provisioning for a range of device types, including Movi users, when the
Starter Pack option key is installed.
used to enable basic device provisioning for a range of device types, including Movi users, when the
Starter Pack option key is installed.
Note that the user account configuration via VCS does not apply if the VCS is using the
to provide user account data.
Account authentication
Administrator and user accounts must be authenticated before access is allowed to the VCS.
The VCS can authenticate accounts either locally or against a remote directory service (the VCS currently
supports only Windows Active Directory) using LDAP. The remote option allows administration groups to be
set up in the directory service for all VCSs in an enterprise, removing the need to have separate accounts on
each VCS.
supports only Windows Active Directory) using LDAP. The remote option allows administration groups to be
set up in the directory service for all VCSs in an enterprise, removing the need to have separate accounts on
each VCS.
If a remote source is used for either administrator or user account authentication you also need to configure
the VCS with:
the VCS with:
n
appropriate LDAP server connection settings (see
n
administrator groups and/or user groups that match the corresponding group names already set up in the
remote directory service to manage administrator and user access to this VCS (see
remote directory service to manage administrator and user access to this VCS (see
and
)
The VCS can also be configured to use
. This would typically be required if
the VCS was deployed in a highly-secure environment.
Administrator accounts
Administrator accounts are used to configure the VCS. The VCS has a default admin administrator account
with full read-write access and can be used to log in to the VCS using the web interface or the CLI.
with full read-write access and can be used to log in to the VCS using the web interface or the CLI.
You can add additional administrator accounts which can only be used to log in through the web interface.
The default admin account is managed locally and is always accessible, even if remote administrator
account authentication is selected. All passwords and usernames are case sensitive.
account authentication is selected. All passwords and usernames are case sensitive.
See the
section for more information.
User accounts
User accounts are used by individuals in an enterprise to configure the devices and locations on which they
can be contacted through their FindMe ID.
can be contacted through their FindMe ID.
Each user account is accessed using a username and password.