Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼

다운로드
페이지 488
Zones and neighbors
Cisco VCS Administrator Guide (X7.0)
Page 128 of 488
Field
Description
Usage tips
TCP retry
count
The number of times the client attempts to send a
TCP probe to the VCS Expressway during call
setup.
TCP keep
alive interval
The interval (in seconds) with which the traversal
client sends a TCP probe to the VCS Expressway
when a call is in place, in order to maintain the
firewall’s NAT bindings.
Configuring ENUM zones
ENUM zones allow you to locate endpoints via an ENUM lookup. You can create one or more search
rules for ENUM zones based on the ENUM DNS suffix used and/or by pattern matching of the
endpoints’ aliases.
After you have configured one or more ENUM zones, you can:
n
apply transforms to alias search requests directed to that group of endpoints
n
control the bandwidth used for calls between your local VCS and each group of ENUM endpoints
Full details of how to use and configure ENUM zones are given in the
section.
The configurable options for an ENUM zone are:
Field
Description
Usage tips
Name The name acts as a unique identifier, allowing you to distinguish
between zones of the same type.
Type
The nature of the specified zone, in relation to the local VCS.
Select ENUM.
After a zone has been created,
the Type cannot be changed.
Hop
count
The hop count is the number of times a request will be forwarded
to a neighbor gatekeeper or proxy (see the
section
for more information). This field specifies the hop count to use
when sending a search request to this particular zone.
If the search request was
received from another zone and
already has a hop count
assigned, the lower of the two
values is used.
DNS
suffix
The domain to be appended to the transformed E.164 number to
create an ENUM domain for which this zone is queried.
H.323
mode
Determines whether H.323 records are looked up for this zone.
SIP
mode
Determines whether SIP records are looked up for this zone.
Configuring DNS zones
DNS zones allow you to locate endpoints via a DNS lookup. You can create one or more search rules for
DNS zones based on pattern matching of the endpoints’ aliases.
After you have configured one or more DNS zones, you can: