Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Applications
Cisco VCS Administrator Guide (X7.0)
Page 258 of 488
Configuring FindMe
The
FindMe configuration
page (
Applications > FindMe > Configuration
) is used to enable and
configure
.
Users configure their FindMe settings by logging into their
. To configure how user accounts
are authenticated, go to the
page.
Note that the
FindMe configuration
page can only be accessed if the FindMe option key is installed.
Field
Description
Usage tips
FindMe mode
Determines whether or not FindMe is
enabled, and if a third-party manager is to be
used.
enabled, and if a third-party manager is to be
used.
Off: disables FindMe.
On: enables FindMe and uses the VCS’s
local FindMe manager.
local FindMe manager.
Remote service: enables FindMe and uses a
FindMe manager located on an off-box
system. This feature is intended for
advanced deployments with third-party
integrators.
FindMe manager located on an off-box
system. This feature is intended for
advanced deployments with third-party
integrators.
is always applied regardless of
the FindMe mode.
If you enable FindMe, you must ensure a
Cluster name is specified (you do this on
the
Cluster name is specified (you do this on
the
page).
Note that FindMe mode is automatically set
to On when the Starter Pack option key is
installed.
to On when the Starter Pack option key is
installed.
Caller ID
Only applies when FindMe mode is On.
Determines how the source of an incoming
call is presented to the callee.
call is presented to the callee.
Incoming ID: displays the address of the
endpoint from which the call was placed.
endpoint from which the call was placed.
FindMe ID: displays the FindMe ID
associated with the originating endpoint's
address.
associated with the originating endpoint's
address.
Using FindMe ID means that if the recipient
subsequently returns that call, all the
devices associated with that FindMe
account will be called. For H.323 calls
placed through an ISDN gateway, the E.164
Phone number associated with the FindMe
account is signaled instead as that is a
more appropriate number to dial when
returning the call. Note that the ISDN
gateway must be registered to the same
VCS as the call recipient.
subsequently returns that call, all the
devices associated with that FindMe
account will be called. For H.323 calls
placed through an ISDN gateway, the E.164
Phone number associated with the FindMe
account is signaled instead as that is a
more appropriate number to dial when
returning the call. Note that the ISDN
gateway must be registered to the same
VCS as the call recipient.
The FindMe ID is only displayed if the
source endpoint has been authenticated (or
treated as authenticated). If it is not
authenticated the Incoming ID is displayed.
See
source endpoint has been authenticated (or
treated as authenticated). If it is not
authenticated the Incoming ID is displayed.
See
for more
details.
Restrict
users from
configuring
their devices
users from
configuring
their devices
Controls if users are restricted from adding,
deleting or modifying their own devices. The
default is Off.
deleting or modifying their own devices. The
default is Off.
By default FindMe users are allowed to
configure further devices in addition to any
principal or provisioned devices assigned to
them by the system administrator. This
setting can be used to stop users from
adding their own devices and restrict them to
being able to only maintain their locations
and their associated devices.
configure further devices in addition to any
principal or provisioned devices assigned to
them by the system administrator. This
setting can be used to stop users from
adding their own devices and restrict them to
being able to only maintain their locations
and their associated devices.