Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Maintenance
Cisco VCS Administrator Guide (X7.0)
Page 310 of 488
Shutting down
The
Shutdown
page (
Maintenance > Shutdown
) allows you to turn off the VCS without having
physical access to the hardware.
CAUTION:
do not shut down the VCS while the red ALM LED on the front of the box is on. This indicates
a hardware fault. Contact your Cisco representative.
The system must be shut down before it is unplugged.
After the system has been shut down, the only way it can be restarted is by pressing the soft power
button on the unit itself. You must therefore have physical access to the unit if you want to restart it after
it has been shut down.
button on the unit itself. You must therefore have physical access to the unit if you want to restart it after
it has been shut down.
Shutting down causes any active calls and registrations to be terminated. For this reason, the Shutdown
section displays the number of current calls and registrations, so you can check these before you
shutdown. If you do not shut down the system immediately, you should refresh this page before shutting
down to check the current status of calls and registrations.
section displays the number of current calls and registrations, so you can check these before you
shutdown. If you do not shut down the system immediately, you should refresh this page before shutting
down to check the current status of calls and registrations.
Shutting down using the web interface
To shut down the VCS:
1. Go to
Maintenance > Shutdown
. You are taken to the
Shutdown
page.
2. Check the number of calls and registrations currently in place.
3. Click Shutdown system.
The
Shutting down
page appears. This page remains in place after the system has successfully shut
down but any attempts to refresh the page or access the VCS will be unsuccessful.
Shutting down using the CLI
The VCS cannot be shut down using the CLI.