Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Reference material
Cisco VCS Administrator Guide (X7.0)
Page 322 of 488
System configuration
n
An External LAN interface field is used to indicate on the
IP
page which LAN port has been
connected to your external network. It also determines the port from which TURN server relay
allocations are made.
allocations are made.
n
On the
DNS
page you can now specify the Local host name. This is the DNS host name that this
VCS is known by.
n
The NTP server field on the
Time
page now defaults to one of four NTP servers provided by Cisco,
either: 0.ntp.tandberg.com, 1.ntp.tandberg.com, 2.ntp.tandberg.com or 3.ntp.tandberg.com.
SIP configuration
New parameters have been added to the SIP configuration page.
n
SIP session expiry timers can be configured through the Session refresh interval and Minimum
session refresh interval settings.
session refresh interval settings.
n
SIP device interoperability can now be configured through the Require UDP BFCP mode and
Require Duo Video mode settings. Note that the default setting of On for these modes is not
supported by some neighbor systems so make sure you select the appropriate Zone profile when
configuring zones.
Require Duo Video mode settings. Note that the default setting of On for these modes is not
supported by some neighbor systems so make sure you select the appropriate Zone profile when
configuring zones.
X4
Multiway™
VCS now supports standards-based Multiway™. This feature allows endpoint users to initiate ad hoc
multiparty calls from their endpoint, -even if the endpoint does not have embedded MultiSite™
capabilities. To enable this feature you must enable and configure the Conference Factory application on
the VCS.
multiparty calls from their endpoint, -even if the endpoint does not have embedded MultiSite™
capabilities. To enable this feature you must enable and configure the Conference Factory application on
the VCS.
TMS Agent
The TMS Agent allows Movi™ v2.0 clients registered to the VCS to be provisioned with phone book and
configuration information by connecting to the VCS rather than directly to TMS.
configuration information by connecting to the VCS rather than directly to TMS.
Microsoft OCS 2007 interoperability
n
The VCS now includes an OCS Relay application, which makes FindMe presence information
available to Microsoft Office Communicator (MOC) clients, and enables Microsoft Office
Communications Server (OCS) 2007 to forward calls to FindMe aliases.
available to Microsoft Office Communicator (MOC) clients, and enables Microsoft Office
Communications Server (OCS) 2007 to forward calls to FindMe aliases.
n
Neighbor and DNS zones now include a pre-configured zone profile for connections to an OCS.
Static NAT support
A VCS Expressway with the Dual Network Interfaces option installed can now be deployed in a DMZ
with a static private address mapped to a public IP address of the external firewall.
with a static private address mapped to a public IP address of the external firewall.