Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Reference material
n
SIP device interoperability can now be configured through the Require UDP BFCP mode and
Require Duo Video mode settings. Note that the default setting of On for these modes is not
supported by some neighbor systems so make sure you select the appropriate Zone profile when
configuring zones.
Require Duo Video mode settings. Note that the default setting of On for these modes is not
supported by some neighbor systems so make sure you select the appropriate Zone profile when
configuring zones.
X4
Multiway™
Cisco VCS now supports standards-based Multiway™. This feature allows endpoint users to initiate
ad hoc multiparty calls from their endpoint, -even if the endpoint does not have embedded MultiSite™
capabilities. To enable this feature you must enable and configure the Conference Factory application
on the Cisco VCS.
ad hoc multiparty calls from their endpoint, -even if the endpoint does not have embedded MultiSite™
capabilities. To enable this feature you must enable and configure the Conference Factory application
on the Cisco VCS.
TMS Agent
The TMS Agent allows Movi™ v2.0 clients registered to the Cisco VCS to be provisioned with phone
book and configuration information by connecting to the Cisco VCS rather than directly to Cisco TMS.
book and configuration information by connecting to the Cisco VCS rather than directly to Cisco TMS.
Microsoft OCS 2007 interoperability
n
The Cisco VCS now includes an OCS Relay application, which makes FindMe presence
information available to Microsoft Office Communicator (MOC) clients, and enables Microsoft
Office Communications Server (OCS) 2007 to forward calls to FindMe aliases.
information available to Microsoft Office Communicator (MOC) clients, and enables Microsoft
Office Communications Server (OCS) 2007 to forward calls to FindMe aliases.
n
Neighbor and DNS zones now include a pre-configured zone profile for connections to an OCS.
Static NAT support
A Cisco VCS Expressway with the Dual Network Interfaces option installed can now be deployed in a
DMZ with a static private address mapped to a public IP address of the external firewall.
DMZ with a static private address mapped to a public IP address of the external firewall.
Password security
n
You can determine whether or not administrator passwords must meet a minimum level of
complexity before they are accepted.
complexity before they are accepted.
n
The admin administrator account and the root account can now have separate passwords.
n
A warning will appear if the password of the default admin administrator account or the root account
are still set to the default.
are still set to the default.
Root account access
Access to the root account using Telnet and SSH can be disabled to increase security on the Cisco
VCS (access over Telnet is now disabled by default).
VCS (access over Telnet is now disabled by default).
Capacity warnings
The Cisco VCS can now raise a warning when it is approaching its maximum licensed capacity for
calls or registrations. This feature is managed using the CLI only using the command:
ResourceUsage Warning Activation Level: <0..100>
calls or registrations. This feature is managed using the CLI only using the command:
ResourceUsage Warning Activation Level: <0..100>
Clustering
The replication of configuration information (including FindMe information) no longer requires the use of
Cisco TMS. Information is replicated across the peers in a cluster within 60 seconds.
Cisco TMS. Information is replicated across the peers in a cluster within 60 seconds.
Call processing
n
The Cisco VCS has a new Call routed mode which will determine whether or not it will attempt to
remove itself from the call signaling path.
remove itself from the call signaling path.
Cisco VCS Administrator Guide (X6)
Page 228 of 295