Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
20
D14049.08
November 2010
November 2010
Grey Headline (continued)
The System information page provides details of the software, hardware, and time settings of the
VCS.
To view the System information page:
VCS.
To view the System information page:
•
Status > System > Information
Some of the items on this page are configurable, and contain links to the page where they
can be configured. For example, clicking on Software options will take you to the Option
keys page, from where you can install new optional features.
can be configured. For example, clicking on Software options will take you to the Option
keys page, from where you can install new optional features.
The page displays the following information:
System information
System name
System name
The name that has been assigned to the VCS.
Product
This will be TANDBERG VCS.
Software version
The version of software that is currently installed on the VCS.
Software build
The build number of this software version.
Software release
date
date
The date on which this version of the software was released.
Software name
The internal reference number for this software release.
Software options
The maximum number of calls, and the availability of additional VCS
features such as FindMe™, Device Provisioning and Dual Network
Interfaces, are controlled through the use of
features such as FindMe™, Device Provisioning and Dual Network
Interfaces, are controlled through the use of
. This section
shows all the optional features currently installed on the VCS.
Hardware version
The version number of the hardware on which the VCS software is installed.
Hardware serial
number
number
The serial number of the hardware on which the VCS software is installed.
Time Information
Up time
The amount of time that has elapsed since the system last restarted.
System time (UTC)
The time as determined by the NTP server.
If no NTP server has been configured, this will show Time Not Set.
If no NTP server has been configured, this will show Time Not Set.
Time zone
The time zone that has been configured on the Time page.
Local time
If an NTP server has been configured, the system time in local time (UTC
adjusted according to the local time zone) is shown.
If no NTP server has been configured, the time according to the VCS’s
operating system is shown.
adjusted according to the local time zone) is shown.
If no NTP server has been configured, the time according to the VCS’s
operating system is shown.
System information
The Ethernet status page provides details of the MAC address and Ethernet speed settings of the
VCS.
To view the Ethernet status page:
VCS.
To view the Ethernet status page:
•
Status > System > Ethernet
The page displays the following information for the LAN 1 port and, if the Dual Network Interfaces
option key has been installed, the LAN 2 port:
option key has been installed, the LAN 2 port:
MAC address
The MAC address of the VCS’s Ethernet device for that LAN port.
Speed
The speed of the connection between the LAN port on the VCS and the
Ethernet switch.
Ethernet switch.
Ethernet status
CISCO TELEPRESENCE
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Status