Cisco Cisco TelePresence Video Communication Server Expressway 관리 매뉴얼
Overview and status information
Field
Description
Creation
time
time
The date and time at which the registration was accepted.
If an NTP server has not been configured, this will say Time not set.
If an NTP server has not been configured, this will say Time not set.
End
time
time
The date and time at which the registration was terminated.
Duration The length of time that the registration was in place.
Peer
Identifies the cluster peer to which the alias was registered.
Reason
The reason why the registration was terminated.
Filtering the list
To limit the list of registrations, enter one or more characters in the Filter field and click Filter. Only
those registrations that contain (in any of the displayed fields) the string you entered will be shown.
those registrations that contain (in any of the displayed fields) the string you entered will be shown.
To return to the full list of registrations, click Reset.
Registration details
The Registration details page (
Status > Registrations > By device
,
Status > Registrations > By
alias
or
Status > Registrations > History
, then click on the registration name) shows the particulars
of a single registration. The exact details shown here depend on the device's protocol, and whether the
registration is still current.
registration is still current.
Unregistering and blocking devices
n
Click Unregister to unregister the device. Note that the device may automatically re-register after a
period of time, depending on its configuration. To prevent this, you must also use a
period of time, depending on its configuration. To prevent this, you must also use a
such as an Allow List or Deny List.
n
Click Unregister and block to unregister the device and add the alias to the
page, thus
preventing the device from automatically re-registering. (This option is only available if the
Restriction policy has been set to Deny List.)
Restriction policy has been set to Deny List.)
Call status
Call status
The Call status page (
Status > Calls > Calls
) lists all the calls currently taking place to or from
devices registered with the VCS, or that are passing through the VCS. If the VCS is part of a cluster,
all calls taking place through any VCS in the cluster are shown.
all calls taking place through any VCS in the cluster are shown.
The following information is displayed:
Field
Description
Start time
The date and time when the call was placed.
Source
The alias of the device that placed the call.
Destination The alias dialed from the device. This may be different from the alias to which the call
was placed, which may have been transformed (due to pre-search transforms, zone
transforms or User Policy).
transforms or User Policy).
Cisco VCS Administrator Guide (X6.1)
Page 32 of 401