Cisco Cisco Web Security Appliance S670 사용자 가이드

By default, the Cloud Connector is deployed in transparent mode. which requires a connection to a 
Layer-4 switch or a version 2 WCCP router.

Ethernet Port

If you configure the M1 interface for management traffic only, you must configure 
the P1 interface for data traffic. However, you can configure the P1 interface even 
when the M1 interface is used for both management and data traffic.

IP Address

The IPv4 address to use to manage the Web Security appliance.

Network Mask

The network mask to use when managing the Web Security appliance on this 
network interface.

Hostname

The hostname to use when managing the Web Security appliance on this network 
interface.

Default Gateway

The default gateway IPv4 address to use for the traffic through the Management 
and/or Data interface.

Name

A name used to identify the static route.

Internal Network

The IPv4 address for this route’s destination on the network.

Internal  Gateway

The gateway IPv4 address for this route. A route gateway must reside on the same 
subnet as the Management or Data interface on which it is configured.

Layer-4 Switch

or

No Device

The Web Security appliance is connected to a layer 4 switch.

or

You will deploy the Cloud Connector in explicit forward mode.

WCCP v2 Router

The Web Security appliance is connected to a version 2 WCCP capable router. 

Note: A password can contain up to seven characters and is optional.