Cisco Cisco UCS C22 M3 Rack Server 문제 해결 가이드
Add Virtual Drive in the Modular RAID
Controller
Controller
Contents
Introduction
Procedure to Add Virtual Drive
Related Information
Introduction
This document describes the procedure to use the Modular RAID Controller (Cisco 12G SASA
Modular RAID) to configure disk drive groups and virtual drives, RAID configuration and to perform
other configuration tasks in a pre-boot environment.
Modular RAID) to configure disk drive groups and virtual drives, RAID configuration and to perform
other configuration tasks in a pre-boot environment.
Procedure to Add Virtual Drive
Perform these steps to configure drive groups and virtual drives with the use of the Modular RAID
Controller.
Controller.
1. Log into the Cisco UCS Manager.
2. Open a console to the host.
3. Reboot the host
On boot up hit Ctrl+R to enter the Cisco 12G SAS Modular Raid Controller BIOS Configuration
Utility.
Utility.