Cisco Cisco UCS C420 M3 Rack Server 데이터 시트
Manageability Features (continued)
Features
Benefits
Alternative RID Interpretation (ARI)
• Enables an interpretation of the Device and Function fields as a single identification of a function within the bus
Device Serial Number
• Allows exposure of a unique serial number for each device
Vital Product Data (VPD) Support
• Support for VPD memory area
MACsec protected management traffic
• Supports a single secure channel for both host and BMC
Flexible MAC Address
• MAC address used by a port can be replaced with a temporary MAC address in a way that is transparent to the software layer
iSCSI/FCoE Boot Configuration via management controller
• Enables the configuration of iSCSI/FCoE boot code from Flash, via expansion ROM
L3 Address Filters
• Four L3 address filters for manageability for both IPv4 and IPv6
Flexible TCO Filters - 4
• The flexible 128 filters are a set of manageability filters designed to enable dynamic filtering of received packets
MCTP over SMBus
• Allow reporting and controlling of all the information exposed in a LOM device via NC-SI, in NIC devices via MCTP over SMBus
NC-SI Package ID via SDP Pins
• SDP pins of the two ports can be combined to encode the NC-SI package ID
Product Codes
Product
Production MM#
Top Marking
Intel® Ethernet Controller X540-AT2
917469
JLX540AT2
For more information on the Intel® Ethernet Controller X540, visit www.intel.com/go/ethernet
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED
BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WAR-
RANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT,
COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
A “Mission Critical Application” is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL’S PRODUCTS FOR ANY SUCH MISSION CRITICAL
APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS
COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS’ FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF
SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined”. Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents that have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or go to: http://www.intel.com/design/literature.htm.
Intel and Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2012, Intel Corporation. All Rights Reserved.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents that have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or go to: http://www.intel.com/design/literature.htm.
Intel and Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2012, Intel Corporation. All Rights Reserved.
Printed in USA
BJ/TAR/SWU
Please Recycle
326917-002US