Cisco Cisco UCS C460 M4 Rack Server 백서
43 © 2016 Cisco and/or its affiliates. All rights reserved.
To create a pool, follow these steps:
1. From vSphere Client, select the StorMagic VSA, or log in to the VSA from a web browser and click the
StorMagic tab.
2. Select
Pools and click Create Pool.
3. In the
Create Storage Pool window, enter the pool name.
4. Select the subsystem to use. Unless you are using a RAID controller, the only subsystem is
Direct Device Mapping.
5. For the RAID level, select
JBOD for the pool.
6. Select the physical disk devices to use for the pool.
7. Optionally, specify the performance level. This setting indicates to you or other users of the system the performance (for
example, the speed) of the storage device. Select a number from 1 to 10. A higher number indicates better performance.
Pools created with versions of SvSAN prior to Release 5.2 are given the value 0 (unclassified).
Pools created with versions of SvSAN prior to Release 5.2 are given the value 0 (unclassified).
8. Optionally, specify any other information about the device in the
Category field. Then click Create (Figure 54).
Figure 54. Creating a Storage Pool
9. If you have multiple RDM disks, repeat the preceding steps to create a pool.
10. Repeat the preceding steps to create the pool on the second StorMagic VSA.