Cisco Cisco UCS C210 M1 General-Purpose Rack-Mount Server 백서
26 © 2016 Cisco and/or its affiliates. All rights reserved.
5. Enter a hostname for the VSA (unique on your network) and domain name and choose the data store on which the VSA
virtual machine is to reside (Figure 31). The data store should be on internal or direct-attached server storage. Two virtual
machine disks (VMDKs) are created in this data store: a 512-MB boot disk and a 20-GB journal disk.
machine disks (VMDKs) are created in this data store: a 512-MB boot disk and a 20-GB journal disk.
Figure 31. Deploying a VSA
6. Choose the desired storage allocation technique (Figure 32). Raw device mappings offer the best performance; however,
SSH must be enabled on the host, but only for the duration of the deployment (SSH can be disabled immediately after
deployment is complete).
deployment is complete).
Warning:
If you select an RDM device that has data stored on it, that data will be permanently deleted during deployment.
Figure 32. Choosing the Storage Allocation Technique
7. If you want to allocate multiple RDMs as a pool, select the
Advanced options checkbox. If the pool you want is listed,
choose it. Otherwise, click
Add. The Create Storage Pool window opens.
Note: Complete the fields to create the pool; then click OK. For more information, see the section “Creating a Pool in the
WebGUI” in the StorMagic documentation at :
WebGUI” in the StorMagic documentation at :
http://www.stormagic.com/manual/SvSAN_5-3/en/.