Cisco Cisco Unified Customer Voice Portal 10.5(1)
param CVPSelfService-port 7000
param CVPSelfService-SSL 0
-OR-
param CVPSelfService-port 7443
param CVPSelfService-SSL 1
param CVPSelfService-app HelloWorld
service CVPSelfService
flash:CVPSelfServiceBootstrap.vxml
paramspace english index 0
paramspace english language en
paramspace english location flash
paramspace english prefix en
Note: The optional
param CVPSelfService-SSL 1
line enables HTTPS.
VoiceXML Gateway Configuration: Example of Dial-peer for Standalone
The following example provides the configuration for an incoming Pots and VoIP call for the
Unified CVP VXML Server (standalone) call flow model:
Unified CVP VXML Server (standalone) call flow model:
Note: VXML Server (Standalone) only supports an incoming call with a TDM through a T1
port. Using an FXS port is not supported.
port. Using an FXS port is not supported.
dial-peer voice 8 pots
description Example incoming POTS dial-peer calling
HelloWorld VXML Server application
service hello_world
incoming called-number <your DN pattern here>
direct-inward-dial
dial-peer voice 800 voip
description Example incoming VOIP dial-peer calling
HelloWorldVXML Server application
service hello_world
translation-profile incoming block
incoming called-number 800.......
voice-class codec 1
dtmf-relay rtp-nte h245-signal h245-alphanumeric
no vad
Unified CVP Call Director Call Flow Models
This section describes the call flows and provides configuration instructions for the following
Unified CVP call flow models:
Unified CVP call flow models:
•
•
Configuration and Administration Guide for Cisco Unified Customer Voice Portal Release 4.1(1)
45
Chapter 2: Configuration Overview
Unified CVP Call Director Call Flow Models