Cisco Cisco Unified Customer Voice Portal 10.0(1)
conf t
application
service <your-cvp-service-name>
param use-uui-as-corrid Y (See Note 1)
param correlation-gtd-attribute XXX (See Note 2)
param correlation-gtd-instance N (See Note 2)
param correlation-gtd-field YYY (See Note 2)
dial-peer voice pots 123
service <your-cvp-service-name>
Note:
• This is a mandatory parameter to enable this feature.
• These parameters are optional. They need only be specified if the call control client placed
the Correlation ID in a GTD parameter other than uus.dat.
Debugging Tips
Debug Trace Settings for the Gateway
On the gateway, enter the following:
•
debug voip application script
•
debug gtd
GTD Values in the Gateway Log
In the gateway log, look for the GTD values:
6616806: *Jan 31 17:12:41.220: cdapi_find_tsm:
Found a gtdmsg of length144:6616807: *Jan 31 17:12:41.220:
gtd msg = "IAM,PRN,isdn*,,
ATT5*,USI,rate,c,s,c,1USI,lay1,ulawTMR,00CPN,00
,,u,5900CPC,09FCI,,,,,,,y,UUS,3,3132333435
---------------------> This is the UUI that will become
the Correlation ID12345GCI,
87c0c79d91dd11daa9c4000bfda207f2"
Performing External Transfers in Unified CCE
Defining a Unified ICME Script Label for Outpulse Transfer
Labels in Unified ICME scripts for Unified CVP calls that require outpulse transfer mode must
be prepended with the characters
be prepended with the characters
DTMF
followed by
*8
and some number of commas, where
each comma represents a pause of 100 milliseconds. By configuring the target label with the
form
form
DTMFnnnnn
(where
nnnnn
are the digits to outpulse) Unified CVP sends the digits
out-of-band using H.245 signalling to the Ingress gateway for outpulsing.
Configuration and Administration Guide for Cisco Unified Customer Voice Portal Release 4.1(1)
423
Chapter 13: Transferring and Queuing Calls with Unified CVP
Performing External Transfers in Unified CCE