Cisco Cisco Customer Voice Portal 8.0(1)

Figure 79: ICM Setup - PG Setup - PIM Parameters

Note: This should be the same port number you used for the CVP call server. You can check
this in the CVP Operations Console. Select: Device Management > CVP Call Server > the
edit window, ICM tab as shown below.

Figure 80: ICM - Add Peripheral Gateway - VRU Connection Port

f.

Keep the default values for the remaining boxes and click OK to accept the input and
return to the Peripheral Gateway Component Properties window.

Enter the Logical controller ID you recorded in 

 (5000 in the example) and click Next.

Getting Started with Cisco Unified Customer Voice Portal Release 8.0(0)