Cisco Cisco Agent Desktop 8.5 사용자 가이드
The Supervisor Desktop Window
June 2007
17
Figure 7.
Preferences dialog box.
2. From the left pane, select the node whose real time displays you want to
configure.
The displays for that node are listed in the right pane.
3. Configure the display as follows. If the element of the display is disabled, it
cannot be configured.
a. Columns—select Columns, and then click the ellipsis (…) to display the
Configure Columns dialog box. Select the columns you wish to appear in
the display, and use the up and down arrows to set the order in which they
appear. If a column name is disabled (appears grayed out), you cannot
move it. Click OK when you are done.
the display, and use the up and down arrows to set the order in which they
appear. If a column name is disabled (appears grayed out), you cannot
move it. Click OK when you are done.
b. Graphical Displays—select Graphical displays, and then click the ellipsis
(…) to display the Select Charts dialog box. Select the chart you wish to
appear, and then click OK. You can select one chart only for each real
time display.
appear, and then click OK. You can select one chart only for each real
time display.
c. Refresh rate—select Refresh rate in seconds and adjust the rate.
4. If you want to be able to move and rearrange the panes that make up the
Supervisor Desktop window, select the Enable movable windows check box.
5. If you want the toolbar icons to be 32 × 32 pixels instead of the default
16 × 16 pixels, select the Enable large toolbar icons check box.
6. If you want to enable the integrated browser, select the Enable Integrated
Browser check box.