Cisco Cisco Cius Wi-Fi 문제 해결 가이드

Contributed by William Ryan Bennett, Cisco TAC Engineer.
Apr 02, 2013

Introduction
Prerequisites
     Requirements
     Components Used
     Conventions
Procedure
Related Information

This document describes how to set the Cisco Cius back to a factory reset.

There are no specific requirements for this document.

The information in this document is based on Cisco Cius (any hardware version).

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Refer to Cisco Technical Tips Conventions for information on document conventions.

This procedure describes how to reset the Cius to factory default settings.

Note: This procedure is the same process that occurs when you select Factory Reset in the Cius under Privacy
Settings.

Complete these steps in order to reset the Cius:

Press and hold the Power button 

 in order to power off the Cius.

1.