Cisco Cisco Cius Wi-Fi 디자인 가이드

Cisco Cius Wireless Deployment Guide

• Set the WMM Policy to Required

• Ensure Session Timeout is enabled and configured correctly

• Ensure Aironet IE is Enabled

• Set DTPC Support to Enabled

• Disable P2P (Peer to Peer) Blocking Action / Public Secure Packet Forwarding (PSPF)

• Ensure Client Exclusion is configured correctly

• Disable DHCP Address Assignment Required

• Set MFP Client Protection to Optional or Disabled

• Set the DTIM Period to 2

• Set Client Load Balancing to Disabled

• Set Client Band Select to Disabled

• Set IGMP Snooping to Enabled

• Enable Symmetric Mobile Tunneling Mode if Layer 3 mobility is utilized

• Enable Short Preamble if using 2.4 GHz

• Enable ClientLink if utilizing Cisco 802.11n Access Points

• Configure the Data Rates as necessary

• Enable CCX Location Measurement

• Configure Auto RF as necessary

• Set Admission Control Mandatory to Enabled for Voice

• Set Load Based CAC to Enabled for Voice

• Configure SIP CAC Support for Voice as necessary

• Enable Traffic Stream Metrics for Voice

• Set Admission Control Mandatory to Disabled for Video

• Set EDCA Profile to Voice and Video Optimized

• Set Enable Low Latency MAC to Disabled

• Ensure that Power Constraint is Disabled

• Enable Channel Announcement and Channel Quiet Mode

• Configure the 802.11n High Throughput Data Rates as necessary

• Configure the Frame Aggregation settings

• Enable CleanAir if utilizing Cisco Access Points with CleanAir technology

• Configure Multicast Direct Feature as necessary

• Set the 802.1p tag to 6 for the Platinum QoS profile

Note: If clients from other regions are present and will attempt to associate with the wireless LAN, then ensure that World
Mode (802.11d) is enabled.

When using 802.1x authentication, it is recommended to implement CCKM to offer fast secure roaming.