Cisco Cisco Cius 4G 디자인 가이드
Cisco Cius Wireless Deployment Guide
12
5.260 – 5.320 GHz
5.500 – 5.700 GHz
5.745 – 5.825 GHz
5.500 – 5.700 GHz
5.745 – 5.825 GHz
4
11
5
11
5
52,56,60,64
100-140
149,153,157,161,165
100-140
149,153,157,161,165
Cisco Cius SP
Part Number
Network Mode
Frequency Range Available
Channels
Channel Set
CIUS-7-AT-K9
Wi-Fi
2.412 – 2.472 GHz
5.180 – 5.240 GHz
5.260 – 5.320 GHz
5.500 – 5.700 GHz
5.745 – 5.825 GHz
5.260 – 5.320 GHz
5.500 – 5.700 GHz
5.745 – 5.825 GHz
13
4
4
11
5
4
11
5
1-13
36,40,44,48
52,56,60,64
100-140
149,153,157,161,165
52,56,60,64
100-140
149,153,157,161,165
Part Number
Network Mode
Network Type
Frequency Ranges
CIUS-7-AT-K9
Mobile
HSPA+ (4G)
W-CDMA (3G)
EDGE/GPRS (2G)
EDGE/GPRS (2G)
850 MHz
900 MHz
1800 MHz (EDGE only)
1900 MHz
2100 MHz (HSPA+ and W-CDMA only)
1800 MHz (EDGE only)
1900 MHz
2100 MHz (HSPA+ and W-CDMA only)
Note: Channels 120, 124, 128 are not supported in the Americas, Europe, or Japan, but may be in other regions around the
world.
802.11j (Wi-Fi channels 34, 38, 42, 46) are not supported.
Channel 14 for Japan is not supported on the newer Cisco Access Points.
world.
802.11j (Wi-Fi channels 34, 38, 42, 46) are not supported.
Channel 14 for Japan is not supported on the newer Cisco Access Points.
World Mode (802.11d)
World Mode allows a client to be used in different regions, where the client can adapt to using the channels and transmit powers
advertised by the access point in the local environment.
Cisco Cius requires the access point to be 802.11d enabled, where it can then determine which channels and transmit powers to
use.
advertised by the access point in the local environment.
Cisco Cius requires the access point to be 802.11d enabled, where it can then determine which channels and transmit powers to
use.
Enable World Mode (802.11d) for the corresponding country where the access point is located.
Some 5 GHz channels are also used by radar technology, which requires that the 802.11 client and access point be 802.11h
compliant if utilizing those radar frequencies (DFS channels). 802.11h requires 802.11d to be enabled.
Cisco Cius will passively scan DFS channels first before engaging in active scans of those channels.
If using 2.4 GHz (802.11b/g) and 802.11d is not enabled, then Cisco Cius can attempt to use channels 1-11 and reduced
transmit power.
Note: World Mode is enabled automatically for the Cisco Unified Wireless LAN Controller.
World Mode must be enabled manually for Cisco Autonomous Access Points using the following commands:
Some 5 GHz channels are also used by radar technology, which requires that the 802.11 client and access point be 802.11h
compliant if utilizing those radar frequencies (DFS channels). 802.11h requires 802.11d to be enabled.
Cisco Cius will passively scan DFS channels first before engaging in active scans of those channels.
If using 2.4 GHz (802.11b/g) and 802.11d is not enabled, then Cisco Cius can attempt to use channels 1-11 and reduced
transmit power.
Note: World Mode is enabled automatically for the Cisco Unified Wireless LAN Controller.
World Mode must be enabled manually for Cisco Autonomous Access Points using the following commands: