Cisco Cisco Firepower Management Center 2000 릴리즈 노트
1
Cisco Systems, Inc.
www.cisco.com
FireSIGHT System Release Notes
Version 5.4.0.5 and Version 5.4.1.4
First Published: November 16, 2015
Last Updated: May 11, 2016
First Published: November 16, 2015
Last Updated: May 11, 2016
Even if you are familiar with the update process, make sure you thoroughly read and understand these release notes,
which describe supported platforms, new and changed features and functionality, known and resolved issues, and
product and web browser compatibility. They also contain detailed information on prerequisites, warnings, and specific
installation instructions for the following appliances:
which describe supported platforms, new and changed features and functionality, known and resolved issues, and
product and web browser compatibility. They also contain detailed information on prerequisites, warnings, and specific
installation instructions for the following appliances:
Series 3 Defense Centers (the DC750, DC1500, DC2000, DC3500, and the DC4000)
Series 2 and Series 3 managed devices (the 3D500, 3D1000, 3D2000,3D7010, 3D7020, 3D7030, 3D7050, 3D7110,
3D7115, 3D7120, 3D7125, 3D8120, 3D8130, 3D8140, 3D8250, 3D8260, 3D8270, 3D8290, 3D8350, 3D8360,
3D8370, 3D8390, AMP7150, AMP8050, AMP8150, AMP8350, AMP8360, AMP8370, and the AMP8390)
3D7115, 3D7120, 3D7125, 3D8120, 3D8130, 3D8140, 3D8250, 3D8260, 3D8270, 3D8290, 3D8350, 3D8360,
3D8370, 3D8390, AMP7150, AMP8050, AMP8150, AMP8350, AMP8360, AMP8370, and the AMP8390)
Cisco ASA with FirePOWER Services (the ASA5506-X, ASA5506H-X, ASA5506W-X, ASA5508-X, ASA5512-X,
ASA5515-X, ASA5516-X, ASA5525-X, ASA5545-X, ASA5555-X, ASA5585-X-SSP-10, ASA5585-X-SSP-20,
ASA5585-X-SSP-40, ASA5585-X-SSP-60, and the ISA 3000)
ASA5515-X, ASA5516-X, ASA5525-X, ASA5545-X, ASA5555-X, ASA5585-X-SSP-10, ASA5585-X-SSP-20,
ASA5585-X-SSP-40, ASA5585-X-SSP-60, and the ISA 3000)
Cisco NGIPS for Blue Coat X-Series
64-bit virtual Defense Centers and managed devices
Note:
You cannot update Cisco NGIPS for Blue Coat X-Series running Version 5.3.0.x of the FireSIGHT System directly
to Version 5.4. Instead, you must uninstall the previous version and install Version 5.4. Note that this results in the loss
of all configuration and event data on the X-Series installation. For more information, see the FireSIGHT Software for
X-Series Installation and Configuration Guide.
of all configuration and event data on the X-Series installation. For more information, see the FireSIGHT Software for
X-Series Installation and Configuration Guide.
Tip:
For detailed information on the FireSIGHT System, refer to the online help or download the FireSIGHT System User
Guide from the Support site.
These release notes are valid for Version 5.4.0.5 and Version 5.4.1.4 of the FireSIGHT System. You can update physical
and virtual managed devices to Version 5.4.0.5. You can update Cisco ASA FirePOWER modules, physical Defense
Center, and virtual Defense Centers to Version 5.4.1.4. Note that you can update appliances in the following manner:
and virtual managed devices to Version 5.4.0.5. You can update Cisco ASA FirePOWER modules, physical Defense
Center, and virtual Defense Centers to Version 5.4.1.4. Note that you can update appliances in the following manner:
Defense Centers (the DC750, DC1500, DC2000, DC3500, and the DC4000) must be running Version 5.4 to update
to Version 5.4.1.4. If your Defense Center is running an earlier version, you must update to Version 5.4 before
updating to Version 5.4.1.4.
to Version 5.4.1.4. If your Defense Center is running an earlier version, you must update to Version 5.4 before
updating to Version 5.4.1.4.
Note:
A Defense Center may update its devices while running Version 5.4, but you will be unable to decrypt or
inspect SSL traffic if your Defense Center remains at Version 5.4. If you plan on decrypting or inspecting SSL traffic,
update your Defense Center to Version 5.4.1.4.
update your Defense Center to Version 5.4.1.4.
Series 2 devices (the 3D500, 3D1000, 3D2000, 3D2100, 3D2500, 3D3500, 3D4500, and the 3D6500) must be
running Version 5.4 to update to Version 5.4.0.5. If your Series 2 device is running an earlier version, you must update
to Version 5.4 before updating to Version 5.4.0.5.
running Version 5.4 to update to Version 5.4.0.5. If your Series 2 device is running an earlier version, you must update
to Version 5.4 before updating to Version 5.4.0.5.
Series 3 devices (the 3D7010, 3D7020, 3D7030, 3D7050, 3D7110, 3D7115, 3D7120, 3D7125, 3D8120, 3D8130,
3D8140, 3D8250, 3D8260, 3D8270, 3D8290, 3D8350, 3D8360, 3D8370, 3D8390, AMP7150, AMP8050, AMP8150,
AMP8350, AMP8360, AMP8370, and the AMP8390) must be running Version 5.4 to update to Version 5.4.0.5. If
your Series 3 device is running an earlier version, you must update to Version 5.4 before updating to Version 5.4.0.5.
3D8140, 3D8250, 3D8260, 3D8270, 3D8290, 3D8350, 3D8360, 3D8370, 3D8390, AMP7150, AMP8050, AMP8150,
AMP8350, AMP8360, AMP8370, and the AMP8390) must be running Version 5.4 to update to Version 5.4.0.5. If
your Series 3 device is running an earlier version, you must update to Version 5.4 before updating to Version 5.4.0.5.