Cisco Denali 16.3.1 릴리즈 노트

For the most up-to-date, detailed troubleshooting information, see the Cisco TAC website at this URL:

Choose Product Support > Switches. Then choose your product and click Troubleshoot and Alerts to 
find information for the problem that you are experiencing.

Cisco IOS XE Denali 16.x.x documentation at this URL:

Catalyst 3850 switch documentation at this URL: 

WebUI: Few scenarios - refreshing issue related to AP with 11AC module

Memory leak seen @ dup_classmap_runtime

Error on editing RogueRule on user configured SSID

IOS-XE : Shell license bypass via LXC (2)

Secure LDAP with wired 1k dot1x sessions may reload the system

TACACS mgmt over wireless not working

vlan pooling-static ip client is not passing traffic for wireless dot1x

CTS: In loopback interface, config of IP SGT map should not be allowed

CFD QMUL: session comes up after port-security violation

Match based on username fails for dot1x client with Native Profile WLAN

Reauth timer running for unauthorized case

Session fails authz after few vlans in group brought down and up

stuck Session with 0 Mac 0 IP not removed from admission cache output

WS-C3850-48XS:'sh inventory FRU' lists fan even after removal/failure

High memory utilization observed on catalyst 3650/3850

Tracebacks on bootup at "epm_vlan_name_insert_or_delete" w/200+ VLANs

crash observed on high rates of roam @  fman_qos_mark_aom_free

AN: ULA is configured on ANI & same ANI used for multiple neighbors

System traceback while Smart Call Home debugs turned on

All the UP interfaces displayed as DOWN after wr erase and reload

Need 5508 to support sleeping client as single Anchor with NGWC

AP flaps for 30 minutes upon changing AP mode after SSO

PI3.1 voice diagnostics SNMP GET not working