Cisco Cisco Firepower Management Center 2000 기술 매뉴얼
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
High availability Features
Configuration shared bidirectionally between peers
Configuration not synced between DCs
Configure
Pre-requisites to configure High Availability
Configure High Availability
Verify
Troubleshoot
Related Information
Introduction
This document describes the configuration of High Availability(HA) for Series 3 Defense
Centers(DC).
Centers(DC).
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Firepower Technology
●
Basic High Availability Concepts
●
Components Used
The information in this document is based on Firepower Defense Center Series 3 devices
(DC1500,DC2000,DC3500,DC4000 ) running from software version 5.3 to software version 5.4.1.6
(DC1500,DC2000,DC3500,DC4000 ) running from software version 5.3 to software version 5.4.1.6
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Background Information
To ensure the continuity of operations, the high availability feature allows you to designate
redundant Defense Centers to manage devices.The Defense Center maintains event data streams
from managed devices and certain configuration elements of these devices. If one Defense Center
redundant Defense Centers to manage devices.The Defense Center maintains event data streams
from managed devices and certain configuration elements of these devices. If one Defense Center