Cisco Cisco IOS Software Release 12.0(23)S
ATM OAM Traffic Reduction
Configuration Examples for ATM OAM Traffic Reduction
6
Cisco IOS Release: Multiple releases (see the Feature History table)
Verify ATM OAM Traffic Reduction
To verify that the ATM OAM Traffic Reduction feature is working, perform the following steps.
SUMMARY STEPS
1.
enable
2.
show atm oam auto-detect
3.
show atm pvc
DETAILED STEPS
Configuration Examples for ATM OAM Traffic Reduction
This section provides the following configuration examples to match the identified configuration tasks
in the previous section:
in the previous section:
•
Step 7
pvc
vpi/vci
Example:
Router(config-if)# pvc 0/100
Creates an ATM PVC and attaches it to the designated
network virtual path identifier (VPI) and virtual channel
interface (VCI).
network virtual path identifier (VPI) and virtual channel
interface (VCI).
In this case, more than one PVC is created.
Step 8
exit
Example:
Router(config-if)# exit
Router(config-router)# exit
Ends the configuration mode.
•
Enter the exit command for each command mode to
exit.
exit.
Command or Action
Purpose
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
show atm oam auto-detect
[atm
interface-number]
Example:
Router# show atm oam auto-detect atm 2/0
(Optional) Displays the state of the OAM cells when the
ATM OAM traffic reduction is enabled.
ATM OAM traffic reduction is enabled.
•
The show atm oam auto-detect command reports the
number of VCs in autodetection mode and in OAM
loopback mode.
number of VCs in autodetection mode and in OAM
loopback mode.
Step 3
show atm pvc
Example:
Router# show atm pvc
(Optional) Displays ATM PVCs and traffic reduction
information.
information.
The show atm pvc command reports the OAM autodetect
state, the OAM peer frequency, and the time the last OAM
command cell was received.
state, the OAM peer frequency, and the time the last OAM
command cell was received.